HP Omen 25 - VESA Adapter by Technius

Last crawled date: 3 years, 4 months ago

This is still a WIP. I have not tested this yet.
This is a 3d-printable VESA mount adapter for the HP Omen 25 monitor, reverse engineered from the stock monitor stand. I designed this because I needed a VESA adapter for my refurbished Omen 25 that I purchased a few years ago, and a phone call with HP support revealed that they don't seem to have replacements in stock.
The adapter works just like the stock monitor stand, e.g. push the adapter into the monitor until you hear a click; the monitor should then be locked into the adapter. To separate them, press the plastic clip holding the monitor in place at the bottom of the adapter and then pull the monitor away from the adapter.
Note: Use this at your own risk. I don't know anything about mechanical engineering so this adapter may not be strong enough to support the monitor.
Any feedback or advice would be appreciated! Feel free to use, share, remix, modify, sell, etc. according to the terms of the GPLv3 and CC-BY-SA 4.0.