HP Agilent Probe Power Connector 3d model
3dmdb logo
GrabCAD
HP Agilent Probe Power Connector

HP Agilent Probe Power Connector

by GrabCAD
Last crawled date: 2 years ago
Body for a connector that plugs into the old probe power connector on equipment such as the 4395A. The pin sockets have been sized for a "friction fit" of M39029/63-368 (which has been tested with the pins in the 4395A and makes good electrical contact). 3D printed on Ultimaker 2 with ABS. Connector pinout can be found on page 9-5 of 4395A service manual (available on Keysight page). When looking into the 4395A connector (flat connector side "on the bottom"), ground is at the top, +15V is on the left, -12.6V is on the right.

Tags