Hotendcover Phaetus Dragonfly BMS for Ender 6 by Danner_3D

Last crawled date: 4 years, 2 months ago

A remix from Rics_3D and a distance plate. The cover is modified to mount a Phaetus Dragonfly BMS Hotend on Ender 6.
I used the fan ducts from Aerodeck for better part cooling. Links below.
Here you can find original Hotend Cover from Rics_3d:https://www.thingiverse.com/thing:4732947
Here you can find Fan ducts from Aerodeck which was originally designed for i-Rics printerhttps://www.thingiverse.com/thing:4786487
Big thanks to both for great designs.
You have to print:
1x Distance_plate_Phaetus_Dragonfly_BMS_V1.1
1x Hotendcover_Phaetus_Dragonfly_BMS_V1.1
1x Fanduct_Vol2.1_rechts (Aerodeck)
1x Fanduct_Vol2.1_links (Aerodeck)
Needed for assembly:
2x M3x20mm to mount Hotendcover
1x 4010 Fan 24V for hotend cooling
4x M3x16mm screws for Fan
2x 4010 Blower 24V for part cooling
4x M2x10mm screws for Blower
4x M2x6mm screws for Blower
1x cable for second part cooling blower
1x JSTXH 2 port plug
Second blower for part cooling needs to be connected to 2nd free fan port on distribution board
Perhaps, you have to adjust the Z Endstop. This i wasn't able to test, due to my modification to linear rails on Z.
Remix can be also used with BMG-Directdrive mod from Rics_3D, but not needed:https://www.thingiverse.com/thing:4730903
Videolink https://youtu.be/OeIM761kHvI