Hot End Enclosure, for Reach3D Printer by Ashaman

Last crawled date: 3 years, 1 month ago

Hot End Enclosure for the Reach3D Printer, by Ashaman
This enclosure will make your Reach3D Printer look great, and it helps with cooling your hot end and your prints!
It also works with all of the following configurations: stock hot end, stock proximity sensor, E3D v6 hot end, BLTouch and 50x15mm radial fan.
IMPORTANT: not all parts has been tested properly, and multiple people has tested different configurations. Creator has not tested all parts.
Stock configuration BOM:
Printed parts:
Hot End Enclosure Main Body.stl
Standard Hot End Clamp with Nutinsert.stl
Fan Shroud for Stock Heatbreak.stl
Proximity Sensor Block.stl
Fan Guard Honeycomb.stl or Fan Guard Circles.stl
Hardware:
1 pcs. M3x20 and M3 nut (clamping sensor)
1 pcs. M3x40, M3 locknut and M3 normal nut (adjusting sensor height)
2 pcs. M3x20 and 2pcs. M3 nuts (attaching hot end clamp to main enclosure body)
2 pcs. M5 nuts (for the hot end clamp, attaching to the carriage)
4 pcs. M3x25 (attaching fan duct and fan guard)
2 pcs. M3x20 and 2 pcs, M3 nuts (radial fan)
BLTouch configuration BOM:
Printed parts:
Hot End Enclosure Main Body.stl
Standard Hot End Clamp with Nutinsert.stl
Fan Shroud for Stock Heatbreak.stl
BLTouch block.stl
Fan Guard Honeycomb.stl or Fan Guard Circles.stl
Hardware:
2 pcs. M3x10 and 2 pcs.M3 nuts (attaching BLTouch to printed block)
1 pcs. M3x40, M3 locknut and M3 normal nut (adjusting sensor height)
2 pcs. M3x20 and 2pcs. M3 nuts (attaching hot end clamp to main enclosure body)
2 pcs. M5 nuts (for the hot end clamp, attaching to the carriage)
4 pcs. M3x25 (attaching fan duct and fan guard)
2 pcs. M3x20 and 2 pcs, M3 nuts (radial fan)
E3D v6 + proximity sensor configuration BOM:
Printed parts:
Hot End Enclosure Main Body.stl
E3D Hot End Inner Clamp.stl
E3D Hot End Outer Clamp.stl
Proximity Sensor Block.stl
Fan Guard Honeycomb.stl or Fan Guard Circles.stl (optional/for looks)
Hardware:
1 pcs. M3x20 and M3 nut (clamping sensor)
1 pcs. M3x40, M3 locknut and M3 normal nut (adjusting sensor height)
2 pcs. M3x20 and 2pcs. M3 nuts (attaching hot end clamp to main enclosure body)
2 pcs. M5 nuts (for the hot end clamp, attaching to the carriage)
4 pcs. M3x10 and 4 pcs. M3 nuts (attaching fan guard, optional)
2 pcs. M3x20 and 2 pcs, M3 nuts (radial fan)
E3D v6 + BLTouch configuration BOM:
Printed parts:
Hot End Enclosure Main Body.stl
E3D Hot End Inner Clamp.stl
E3D Hot End Outer Clamp.stl
BLTouch block.stl
Fan Guard Honeycomb.stl or Fan Guard Circles.stl (optional/for looks)
Hardware:
2 pcs. M3x10 and 2 pcs.M3 nuts (attaching BLTouch to printed block)
1 pcs. M3x40, M3 locknut and M3 normal nut (adjusting sensor height)
2 pcs. M3x20 and 2pcs. M3 nuts (attaching hot end clamp to main enclosure body)
2 pcs. M5 nuts (for the hot end clamp, attaching to the carriage)
4 pcs. M3x10 and 4 pcs. M3 nuts (attaching fan guard, optional)
2 pcs. M3x20 and 2 pcs, M3 nuts (radial fan)
First print test with enclosure:https://www.youtube.com/watch?v=3JLHq4nX5GU
Mods and ads:
360 part fan duct by Tymmy:http://www.thingiverse.com/thing:2252109
Credit:
BETA testing and E3D v6 + BLT pictures: http://www.thingiverse.com/Grogo666/about