Thingiverse
Honda CRV Grille Emblem (2nd generation 2002-2004) by infinigrove
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is not an easy part to print. Please read through details and watch video before trying to print.
See video @ http://dai.ly/x6f6zqt
Yes, this is a remix of the Honda Key Chain. The key ring hole was removed, it was resized and threads were added using Metric Screw Thread Library http://www.thingiverse.com/thing:31363
Support Material settings
Type = Grid
Pattern spacing = 7mm
Infill Angle = 90 degrees (the 45 degree default makes my Y axis move a bit funky)
Interface Layers = 9 layers
X and Y Distance = 2.5mm (you might be able to go 2mm but less than that and you will probably goober the threads)
Z Gap = 6 layers
See video @ http://dai.ly/x6f6zqt
Yes, this is a remix of the Honda Key Chain. The key ring hole was removed, it was resized and threads were added using Metric Screw Thread Library http://www.thingiverse.com/thing:31363
Support Material settings
Type = Grid
Pattern spacing = 7mm
Infill Angle = 90 degrees (the 45 degree default makes my Y axis move a bit funky)
Interface Layers = 9 layers
X and Y Distance = 2.5mm (you might be able to go 2mm but less than that and you will probably goober the threads)
Z Gap = 6 layers