Homemade Truck 3d model
3dmdb logo
Free3D
Homemade Truck

Homemade Truck

by Free3D
Last crawled date: 2 years, 10 months ago
I found on the Internet drawing of a self-made truck, and then I made it in 3D. The drawing is in the archive with the model. In the drawing, there is a description in Russian, I translate here into English: "The frame can be welded and most of the same sill or more number It is important to identify the main its size frame width (in my truck - 640 mm) is dictated by the angles of rotation of the front.. wheel and the diameter thereof corresponding to the dimensions of the power unit and the width of the bridges. The distance between the last (the base) defines the frame length (I base 2430 mm). In turn, the base depends on the arrangement of the power unit and the transmission. To the frame are welded or bolted different brackets. washers not (yet do without it, as necessary to ride mainly along the country road, alone, mostly in dry weather). The dashboard is self-made from 1.5 mm steel sheet, covered with imitation leather. on the left side of her plate is located devices from Moskvich-2141, on the right - the glove compartment (glove box), in the mid - audio equipment (but the last one, of course, to install is not compulsory) shield on occasion replace:. does not matter when haywire one device, pull out with a shield has to everything. It is advisable to do as in a truck, where every device itself. Seats were first self-made: from the corners of welded frames covered with fabric on foam rubber. They are mounted on the edges and in the middle of an improvised left. Underneath placed toolbox. Inside the cabin made upholstered ceiling, doors, walls. All pedpli management - suspended from the car VAZ-2101, from him, and the shift lever. The steering wheel, the ignition and the entire column - written off by taxi GAZ-24. But the horn - a real rarity: the car GAZ-M-20 victory. However, such a device is not the only one, there are other components and assemblies - his contemporaries, no one knows how to save. For example, the front and rear axles. And he and the other - from the long-lived truck GAZ-51, is very widespread and a good car for its time."

Tags