Thingiverse
Holosun Cap HS503G by merkelpascal
by Thingiverse
Last crawled date: 4 years, 11 months ago
Hey guys,
I just made an Reddot cover that fits my Holosun HS503G smoothly. Since my AR is an Spartan version i added a random Spartan helmet to it, but also added a clean version.
The inner diameter is 29mm so you could adjust your print to your needs.
I bought 2.5mm thick elastic rope, but you could use a haair tie instead. i used aprox 75mm long rope on each side and it works well
I added a screenshot of the support i used inside. It worked great and could easily removed by twisting it out with pliers.
Have fun,
Pascal Merkel
I just made an Reddot cover that fits my Holosun HS503G smoothly. Since my AR is an Spartan version i added a random Spartan helmet to it, but also added a clean version.
The inner diameter is 29mm so you could adjust your print to your needs.
I bought 2.5mm thick elastic rope, but you could use a haair tie instead. i used aprox 75mm long rope on each side and it works well
I added a screenshot of the support i used inside. It worked great and could easily removed by twisting it out with pliers.
Have fun,
Pascal Merkel