Cults
Holeylayers2
by Cults
Last crawled date: 6 years, 2 months ago
This LED lamp uses the same basic geometry as https://cults3d.com/en/3d-model/home/holeylayers1, but the layers are taller and are rounded instead of having sharp edges. As a result it takes a bit longer to print; this part printed in 25 2/4 hours using a layer height of 0.200 mm and a print speed of 80 mm/sec.
The lamp is designed for an LED "puck" light. Battery operated lights are about $4 each; simply do a web search for "LED puck light" to find several sources. This blog page tells where you can get wall powered lights that are brighter and that work very well: http://birkbinnard.com/blog/wall-powered-led-lights/.
The lamp is designed for an LED "puck" light. Battery operated lights are about $4 each; simply do a web search for "LED puck light" to find several sources. This blog page tells where you can get wall powered lights that are brighter and that work very well: http://birkbinnard.com/blog/wall-powered-led-lights/.
Similar models
cults
free
Threadlight1
.../wall-powered-led-lights/.
this print took just under 36 hours using a layer height of 0.140 mm and a print speed of 100 mm/sec.
cults
free
QuadTwistLED1
...d.com/blog/the-quadruple-twist/
this part printed in 22 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
RotateSlats3
...ights/. for battery powered puck lights just go to any large home improvement store or simply google "led puck light".
cults
free
Spirals2
...lights/. for battery powered puck lights just go to any large home improvement store or simply google "led puck light".
cults
free
DoubleTwistLamp1
...it. for details why this is the case see that page or, for more information, this one: http://birkbinnard.com/blog/do-the-twist/.
cults
free
DoubleTwistLamp4
...doubletwistlamp4 cults led_lamp nightlight table_lamp this lamp is similar in shape to https://cults3d.com/en/3d-model/home/doubletwistlamp3 but uses different geometry to...
cults
free
SectionLight1
...t color would work better. this print took just under 26 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
Wavelight1
... you can get wall powered lights that are brighter and that work very well: http://birkbinnard.com/blog/wall-powered-led-lights/.
cults
free
SectionLight2
...ults in more fine stringing. this print took 14 hours 3 minutes using a layer height of 0.200 mm. and print speed of 100 mm/sec.
cults
free
DoubleTwistLamp3
...mm. for details why this is the case see that page or, for more information, this one: http://birkbinnard.com/blog/do-the-twist/.