Thingiverse
Holder for Black&Decker RT650KA by Imprenta3D
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a work in progress.
I use a Black and Decker RT650KA*.
04/01/2016 Improved parts for the front fixing (pieza roscada pitch2_3-A/B)
You can use it both horizontal and vertical.
You will need:
4 x M4 screws and nuts.
1 x M3x10 screw, washer and nut.
1 x 20x90mm velcro without glue.
1 x 20x25mm velcro with glue.
1 x Ø2x25mm shaft.
I used a piece of wood for fixing the set to a table.
Last version: https://youtu.be/8PiaMl7-6I0
1st version:https://youtu.be/BmG7AjDM0KI
*affiliate link
I use a Black and Decker RT650KA*.
04/01/2016 Improved parts for the front fixing (pieza roscada pitch2_3-A/B)
You can use it both horizontal and vertical.
You will need:
4 x M4 screws and nuts.
1 x M3x10 screw, washer and nut.
1 x 20x90mm velcro without glue.
1 x 20x25mm velcro with glue.
1 x Ø2x25mm shaft.
I used a piece of wood for fixing the set to a table.
Last version: https://youtu.be/8PiaMl7-6I0
1st version:https://youtu.be/BmG7AjDM0KI
*affiliate link