Thingiverse
Hobby Lobby Hunter/Tornado suspension arms by bummster
by Thingiverse
Last crawled date: 3 years, 1 month ago
Longer suspension arms for the Hobby Lobby Hunter & Tornado RC cars from the early 80's.
Common to both front and rear
Track will go up 60mm total
Zero caster and camber *except for the rears, see below.
Upper arms were designed to maximize shock travel and angle within the space provided. This created a much more damped feel, but you will probably need to adjust your spring perches.
Lower arms were designed to accept anti roll bar end links.
Bump stops are setup for ~40 degrees total movement. ~20 degrees at max droop and compression. This should help keep the dog bones from popping out and for sure will keep them from binding against the drive cups.
As much as possible, all hardware is reused but you will need to source a few things.
Front
The front A-Arms have print in place ball joints. Before use, rotate the ball 180 degrees. The cup in the ball is designed to firmly hold the front axle knuckle king pin pivots.
Rear
Upper arms were designed for equal length suspension, but this does lead to the geometry being a little wonky. Negative camber at full droop, positive camber at full compression. To correct the geometry, I either need to make the upper arm shorter and mount it like the stock part, or make a new taller rear hub. "It's fine" for bashing though.
Required parts:
4x HPI Dogbone #101064. But any dogbone that is 90mm long from center to center, and has 8mm drive balls will work. A HPI #101358 works too. 8mm drive ball dogbones are not uncommon in 1/8 scale RC, though not universal. 7mm drive ball dogbones are too small, I've bought and failed with HPI #86230. =(
Longer steering links
8x M3 x 18mm screws (for bump stops)
4x M3 x 25mm screws (for shocks)
12x M3 nylock nuts
I'm fairly certain, like 99%, that these will bolt right up to a Robbe Pantera, Serpent Cobra, and Graupner Hunter.
I'm 100% certain these will bolt right up to a Skyward Labs Mean Mudder.
Update Nov 25, 2017: Added untested part files to add 1' camber all around, 10' caster up front, and 1' toe in in the rear. My printer is having issues and haven't printed them yet.
Common to both front and rear
Track will go up 60mm total
Zero caster and camber *except for the rears, see below.
Upper arms were designed to maximize shock travel and angle within the space provided. This created a much more damped feel, but you will probably need to adjust your spring perches.
Lower arms were designed to accept anti roll bar end links.
Bump stops are setup for ~40 degrees total movement. ~20 degrees at max droop and compression. This should help keep the dog bones from popping out and for sure will keep them from binding against the drive cups.
As much as possible, all hardware is reused but you will need to source a few things.
Front
The front A-Arms have print in place ball joints. Before use, rotate the ball 180 degrees. The cup in the ball is designed to firmly hold the front axle knuckle king pin pivots.
Rear
Upper arms were designed for equal length suspension, but this does lead to the geometry being a little wonky. Negative camber at full droop, positive camber at full compression. To correct the geometry, I either need to make the upper arm shorter and mount it like the stock part, or make a new taller rear hub. "It's fine" for bashing though.
Required parts:
4x HPI Dogbone #101064. But any dogbone that is 90mm long from center to center, and has 8mm drive balls will work. A HPI #101358 works too. 8mm drive ball dogbones are not uncommon in 1/8 scale RC, though not universal. 7mm drive ball dogbones are too small, I've bought and failed with HPI #86230. =(
Longer steering links
8x M3 x 18mm screws (for bump stops)
4x M3 x 25mm screws (for shocks)
12x M3 nylock nuts
I'm fairly certain, like 99%, that these will bolt right up to a Robbe Pantera, Serpent Cobra, and Graupner Hunter.
I'm 100% certain these will bolt right up to a Skyward Labs Mean Mudder.
Update Nov 25, 2017: Added untested part files to add 1' camber all around, 10' caster up front, and 1' toe in in the rear. My printer is having issues and haven't printed them yet.
Similar models
thingiverse
free
Tamiya Beetle short upper rear suspension arm by vw83gti
...le short upper rear suspension arm. will give the camber look of a lowered swingaxle bug. can be used with the normal driveshafts
thingiverse
free
Tekno EB410 Droop Gauge by ra99gt
...er mark on the lower shock mounting pin to set the droop. the stock droop settings are 78 mm in the front and 88 mm in the rear.
thingiverse
free
HPI Baja 5B Rear shock upper brace by poly101
...race by poly101
thingiverse
hpi baja 5g rear shock brace
fits well,
4 hr print on up with high
1 hr print on up with lowerst res
thingiverse
free
Tamiya TT-02 Upper Arms Various Camber by WrenchToDrive
...o loose is not so easy to fix and too tight just takes a bit of filing.
use at your own risk.
wrench to drive or drive to wrench?
grabcad
free
Locost rear upper wishbone camber adjuster
...locost rear upper wishbone camber adjuster
grabcad
locost rear upper wishbone camber adjuster kit car suspension
3dwarehouse
free
85238 - HPI Savage upper suspension arm (x4)
...85238 - hpi savage upper suspension arm (x4)
3dwarehouse
85238 - suspension arm set - black #85238 #hpi #rc #savage
thingiverse
free
Schumacher Cougar/Storm 2000 Front Arm (SACS) by rcnand
...sily if that is your preference.
ream the hinge pin holes with a 1/8" drill bit. tap the shock mounting holes with a m3 tap.
grabcad
free
SPC front upper control arm.
...s://grabcad.com/library/civic-6-upper-and-lower-ball-joints-front-suspension-1
does not fit civic 5 due to mounts of other type.
thingiverse
free
ARRMA raider front upper suspension arm by Nys1
...arrma raider front upper suspension arm by nys1
thingiverse
arrma front suspension arm (up)
thingiverse
free
Hobby Lobby Hunter GoPro mount by bummster
...ingiverse
gopro mount that bolts to the roll cage of a hobby lobby hunter.
required hardware:
2x m3 x 10mm bolt
2x m3 nylock nut
Bummster
thingiverse
free
Bridge 4 Glyph challenge ring for PK by bummster
...bridge 4 glyph challenge ring for pk by bummster
thingiverse
for my brother
thingiverse
free
Gladiator geartrack gearwall hook by bummster
...gladiator geartrack gearwall hook by bummster
thingiverse
a simple hook so i can hang up random garage trinkets on the wall.
thingiverse
free
Hobby Lobby Hunter GoPro mount by bummster
...ingiverse
gopro mount that bolts to the roll cage of a hobby lobby hunter.
required hardware:
2x m3 x 10mm bolt
2x m3 nylock nut
thingiverse
free
Overlord Pro - magnet holders by bummster
...gnets can then be used to hold a door closed or hold up frequently used tools. uses a common computer screw to keep it in place.
thingiverse
free
Overlord Pro - microswitch z probe mount by bummster
...ave a note if it works alright for you though.
the switch this is made for is a typical omron 5a 250v ss-5gl2t with a roller arm.
thingiverse
free
M20x1.5 male to 8mm ID barb by bummster
...e with my k40 didn't have the fitting i needed. this will fit a dymax 2000. i scavenged a 21mm od o-ring from somewhere else.
thingiverse
free
Overlord Pro - Belt and pulley cover by bummster
...ng the belt tensioners when at the extremes of the build volume.
friction fit. shouldn't move much at all once its in there.
thingiverse
free
Pokemon Go Plus - Great ball case by bummster
...keball version here: https://www.thingiverse.com/thing:3013470
ultra ball version here: https://www.thingiverse.com/thing:3027704
thingiverse
free
Paracord spool (100ft capacity) by bummster
...ere. the other end escapes the spool through the notch. pass the escaped end through the loop the other end made and pull taught.
thingiverse
free
Overlord Pro - Optical end stop bracket by bummster
...e: these endstops do require a 5v vsc, so you'll need to do some ninja wiring to get it to work on the stock microcontroller.
Tornado
3ddd
$1
диван Tornado
...диван tornado
3ddd
tornado
диван tornado
turbosquid
$20
Tornado
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
tornado
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$75
Tornado 3D Model
...tornado 3d model
3dexport
tornado low polygon
tornado 3d model mikemu 64260 3dexport
turbosquid
$20
Tornado Small
...yalty free 3d model tornado small for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1383489)
turbosquid
$100
Tornado GR4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tornado FumeFX
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Tornado
...
turbosquid
royalty free 3d model aletta for download as max on turbosquid: 3d models for games, architecture, videos. (1152155)
3d_export
$199
Tornado F3 3D Model
...tornado f3 3d model
3dexport
tornado f3 fighter aircraft airplane plane military
tornado f3 3d model drguz 67 3dexport
3d_ocean
$15
Panavia Tornado GR4
...t panavia plane soar tornado transport
low polygon and nicely detailed panavia tornado gr4 . check out my profile for more items!
Hunter
3d_export
$5
Hunter woman
...hunter woman
3dexport
hunter woman
turbosquid
$15
The Hunter
...squid
royalty free 3d model the hunter for download as blend on turbosquid: 3d models for games, architecture, videos. (1286686)
3d_export
$25
Hunter
...hunter
3dexport
3d_export
$5
warrior hunter
...warrior hunter
3dexport
ready game character hunter
turbosquid
$50
Hunter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
hunter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Hunter
...hunter
3ddd
статуэтка
модель настроена под corona render. имеется простенький скелет.
turbosquid
$100
Monster Hunter
...uid
royalty free 3d model monster hunter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1713505)
turbosquid
$45
Bounty Hunter
...id
royalty free 3d model bounty hunter for download as blend on turbosquid: 3d models for games, architecture, videos. (1335553)
turbosquid
$30
Star Hunter
...osquid
royalty free 3d model star hunter for download as obj on turbosquid: 3d models for games, architecture, videos. (1457326)
Lobby
turbosquid
$18
Lobby
...obby
turbosquid
royalty free 3d model lobby for download as on turbosquid: 3d models for games, architecture, videos. (1659904)
turbosquid
$18
Lobby
...y
turbosquid
royalty free 3d model lobby for download as max on turbosquid: 3d models for games, architecture, videos. (1643760)
turbosquid
$17
Lobby
...y
turbosquid
royalty free 3d model lobby for download as max on turbosquid: 3d models for games, architecture, videos. (1643748)
turbosquid
$15
Lobby
...y
turbosquid
royalty free 3d model lobby for download as max on turbosquid: 3d models for games, architecture, videos. (1615845)
turbosquid
$15
Lobby
...y
turbosquid
royalty free 3d model lobby for download as max on turbosquid: 3d models for games, architecture, videos. (1618585)
turbosquid
$29
Lobby
...royalty free 3d model lobby for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1311484)
turbosquid
$49
Lobby
...ty free 3d model lobby for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1401662)
turbosquid
$160
Lobby
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Lobby
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Lobby Armchair
...lobby armchair
3ddd
polys: 89092
typical armchair for lobbies
Hobby
archive3d
free
Hobby 3D Model
...ing-horse hobby-horse
seat baby n070411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
HOBBY ROCKET
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Hobby Knife
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
HOBBY PAINT BOTTLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кресло Hello Hobby 3108-01
... hello hobby
классическое кресло из ротанга фабрики hello hobby. арт. 3108-01. габариты 950*890*1030
3ddd
free
Стул Hello Hobby 3108-09
... hello hobby
классический стул ручной работы из ротанга фабрики hello hobby. арт. 3108-09. габариты 670*580*1030
3d_export
$49
Houston William Hobby Airport 10km
...houston william hobby airport 10km
3dexport
3ddd
$1
Стол Hello Hobby 3014(2)-07
... hello hobby
классический стол ручной работы из ротанга фабрики hello hobby. арт. 3014(2)-07. габариты 900*1600*770.
3ddd
$1
Консоль Hello Hobby 3083-51
... консоль.
консоль в классическом стиле ручной работы из ротанга фабрики hello hobby. арт. 3083-51. габариты 430*1220*760.
turbosquid
$99
Hobby and Decor Set 04 (22 Product)
...d decor set 04 (22 product) for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262740)
Suspension
3ddd
free
Circolo Suspension
...circolo suspension
3ddd
circolo , suspension
this is the circolo led suspension
3d_export
$20
suspension
...pension
3dexport
suspension it is used in bicycle, motorcycle; and many more object<br>rendering is done in photo view 360
3ddd
$1
Fieltebek suspension
...fieltebek suspension
3ddd
fieltebek , suspension
fieltebek
3d_export
free
suspension
...suspension
3dexport
3ddd
$1
Botti Suspension
...botti suspension
3ddd
botti
люстра botti suspension
turbosquid
$25
suspension
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
suspension
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
SUSPENSION
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
DELIGHTFULL MATHENY | SUSPENSION
... matheny , suspension
delightfull matheny | suspension
design_connected
$16
Vaeder Suspension
...vaeder suspension
designconnected
modular lighting instruments vaeder suspension computer generated 3d model.
Arms
archibase_planet
free
Arm
...ase planet
arm hand right hand skeleton
arm human skeleton right arm n030515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
3ddd
$1
arm chair
...arm chair
3ddd
arm chair , пуф
arm chair
turbosquid
$5
arm
...arm
turbosquid
royalty free 3d model arm for download as obj on turbosquid: 3d models for games, architecture, videos. (1306158)
turbosquid
free
Arm
...arm
turbosquid
free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1346955)
turbosquid
$29
Arm
...osquid
royalty free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1382436)
3d_export
$5
coat of arms
...coat of arms
3dexport
coat of arms
3ddd
$1
ARM SOFA
...arm sofa
3ddd
arm sofa
3ddd
$1
Arm chair
...arm chair
3ddd
arm chair
3ddd
$1
Arm chair
...arm chair
3ddd
угловое
arm chair
3ddd
$1
ARM CHAIR
...arm chair
3ddd
arm chair clothes