Thingiverse
Hinged Raspberry Pi Case with LiIon Battery pack and power/charge circuit by wandrson
by Thingiverse
Last crawled date: 4 years, 1 month ago
This box is design to turn the Raspberry Pi in to a self-contained device in headless mode. Of course the HDMI and USB ports are available so you can connect an external monitor and keyboard/mouse as well.
The box is designed to use four external components; an adafruit 1000C USB/Liion charger board, a 3 cell (6600mAH) Liion battery pack, and an sliding SPDT switch, and finally a USB microB connector for powering the Pi.
It works with either the B+ or the Pi2 or Pi3 and has room for additional internal circuitry and components.
I have included the FreeCAD format files so additional changes can be made if desired.
UPDATE May 2017
I have updated the design and included the AutoDesk Fusion 360 design files for anyone who wishes to modify the design.
The box is designed to use four external components; an adafruit 1000C USB/Liion charger board, a 3 cell (6600mAH) Liion battery pack, and an sliding SPDT switch, and finally a USB microB connector for powering the Pi.
It works with either the B+ or the Pi2 or Pi3 and has room for additional internal circuitry and components.
I have included the FreeCAD format files so additional changes can be made if desired.
UPDATE May 2017
I have updated the design and included the AutoDesk Fusion 360 design files for anyone who wishes to modify the design.