Thingiverse
Hinge 270° by DDDandstuffspace
by Thingiverse
Last crawled date: 4 years, 4 months ago
Hinges I've designed for my resin printer enclosure.
Range of motion: 0 - 270°.
They are 3D printing optimized and do not require supports.
I've printed them with a 0.8mm nozzle, 5 walls and a 100% infill.
0.3mm of clearace worked as a charm with a 0.8mm nozzle, so you should be fine with smaller ones.
Requires one M4x40mm Nut.
Range of motion: 0 - 270°.
They are 3D printing optimized and do not require supports.
I've printed them with a 0.8mm nozzle, 5 walls and a 100% infill.
0.3mm of clearace worked as a charm with a 0.8mm nozzle, so you should be fine with smaller ones.
Requires one M4x40mm Nut.