Thingiverse
Hidden Pump or CO2 for Yeti Bikes by lukasseitz
by Thingiverse
Last crawled date: 4 years, 7 months ago
WIth this design you will be able to hide a CO2 cartridge or a Barbieri Nana minipumps inside your current Yeti frames (SB130, SB140, SB150, SB165).
The frame insert will replace the cable port cover below the bottom bracket.
If you decide to use the pump version, you have to glue the pump adapter to the end of your pump opposite to the pump head.
If you'd like to store a cartridge you should glue a OneUp Components CO2 inflator head into the CO2 adapter (only one way possible). The mud cover can be used to avoid contamination of the inflator.
The adapters screw into the frame insert. Depending on the tolerances of the printed product you might need to add an o-ring (20x2.5) into the groove on the adapter to ensure a tight fit.
The CO2 might require a little wiggle to clear the dropper post actuator cable.
The frame insert will replace the cable port cover below the bottom bracket.
If you decide to use the pump version, you have to glue the pump adapter to the end of your pump opposite to the pump head.
If you'd like to store a cartridge you should glue a OneUp Components CO2 inflator head into the CO2 adapter (only one way possible). The mud cover can be used to avoid contamination of the inflator.
The adapters screw into the frame insert. Depending on the tolerances of the printed product you might need to add an o-ring (20x2.5) into the groove on the adapter to ensure a tight fit.
The CO2 might require a little wiggle to clear the dropper post actuator cable.