Thingiverse
![hictop printhead backplane - ready for diamond hotend by megic](/previews/8525341.jpg)
hictop printhead backplane - ready for diamond hotend by megic
by Thingiverse
Last crawled date: 3 years, 1 month ago
hi everybody,
in order to be able to attach my new diamond-hotend properly to my hictop printer, i needed a replacement for the stock backplane. all other parts which i could find here had some drawbacks, so i decided to come up with my own.
this here features ALL the holes of the x-bearings, the wholes for my diamond-hotend-mix plus it has a unique feature on the side, which i call "universal-fix". You can use it to attach whatever thing from the side (fan, level-sensor, leds, camera...). just press in two nuts and you're ready to go.
lateron i will also post my mix of the diamond-hotend including a dummy e3d-coldend, as my hictop will only support 2 colors, while the diamond would feature 3.
have fun!
in order to be able to attach my new diamond-hotend properly to my hictop printer, i needed a replacement for the stock backplane. all other parts which i could find here had some drawbacks, so i decided to come up with my own.
this here features ALL the holes of the x-bearings, the wholes for my diamond-hotend-mix plus it has a unique feature on the side, which i call "universal-fix". You can use it to attach whatever thing from the side (fan, level-sensor, leds, camera...). just press in two nuts and you're ready to go.
lateron i will also post my mix of the diamond-hotend including a dummy e3d-coldend, as my hictop will only support 2 colors, while the diamond would feature 3.
have fun!
Similar models
thingiverse
free
![D300VS Diamond Hotend Parts by jwellman](/t/8708613.jpg)
D300VS Diamond Hotend Parts by jwellman
...d holder from here (which i believe is the same as the "stock" diamond holder):http://www.thingiverse.com/thing:1997927
thingiverse
free
![10" inch touch display Raspberry Pi backplane and stand by Phyti1](/t/8074072.jpg)
10" inch touch display Raspberry Pi backplane and stand by Phyti1
...and which got broken. it should fit the other parts fine and also has all other holes which are as close as i could measure them.
thingiverse
free
![Diamond Hotend - Cooler Shield for Prusa i3 / Rework / Toolson by TobyTetzi123](/t/8874856.jpg)
Diamond Hotend - Cooler Shield for Prusa i3 / Rework / Toolson by TobyTetzi123
... my prusa / graber i3 with rework / toolson parts.
i made an adapter to mount with 23x23mm holes at the x-carriage.
regards toby
thingiverse
free
![BTT ZSYong Mix Hotend for ProperPrinting tool change by nightilizer](/t/8006553.jpg)
BTT ZSYong Mix Hotend for ProperPrinting tool change by nightilizer
...ould not commit to a non all metal hotend so i attached this using the pp tool changer. https://www.thingiverse.com/thing:3369444
thingiverse
free
![Remix - Diamond hotend TEVO Tarantula X-axis carriage by galaxyman7](/t/8834369.jpg)
Remix - Diamond hotend TEVO Tarantula X-axis carriage by galaxyman7
...d mount page and thingirob's carriage page.
note: i also attached a few more parts that are required for the diamond upgrade
thingiverse
free
![Sparkcube Diamond Hotend by scuba](/t/8763578.jpg)
Sparkcube Diamond Hotend by scuba
...ill the m4 mounting hole on the right side in your own.
i've also added an e3d v6 single nozzle mount as drop in replacement.
thingiverse
free
![HICTOP Branding Cover - Put your name on the printer by igortopolski](/t/8690412.jpg)
HICTOP Branding Cover - Put your name on the printer by igortopolski
...nsert with my nickname.
let me know if you like it in comments and make sure to click "i made one" when you print it :)
thingiverse
free
![BLTouch Holder (Remixed CR-10 hanging 40mm fan/part cooler) by DrNeis](/t/8596011.jpg)
BLTouch Holder (Remixed CR-10 hanging 40mm fan/part cooler) by DrNeis
...itional bracket is need which can be found here: https://www.thingiverse.com/thing:2473423
feel free to comment or ask questions.
thingiverse
free
![Enclosure for Five 3.5" HDDs With Handle Support by Blargedy](/t/8043614.jpg)
Enclosure for Five 3.5" HDDs With Handle Support by Blargedy
...lane.
the hdd handles that fit into this enclosure can be found here
see my specific version, which has fan cooling options here
thingiverse
free
![Diamond Mixing hotend for Rostock by rchilso](/t/8576678.jpg)
Diamond Mixing hotend for Rostock by rchilso
...with mount/platform/light ring attached there is plenty of nozzle below the platform to not cause binding issues. hope this helps
Megic
thingiverse
free
![Camper - Caravan by megic](/t/8286512.jpg)
Camper - Caravan by megic
... model, but it made me feel better ;-). the complete wheel is now fully round and it doesn't have holes in the back any more.
thingiverse
free
![Cafe Racer revisited by megic](/t/8604370.jpg)
Cafe Racer revisited by megic
...he fun of having airtires ;-)
have fun,
megic
ps: the logo is in just because it was a present to a special person - doesn't
thingiverse
free
![Killswitch by megic](/t/8643891.jpg)
Killswitch by megic
... it in place.
the ball joints could be a bit tighter - but i didn't want to risk the sides to break when inserting the hood.
thingiverse
free
![rugged airport buckle with 2-color logo on a single color printer by megic](/t/8647836.jpg)
rugged airport buckle with 2-color logo on a single color printer by megic
...:299087
if you want to do your on, just fill the top 1mm solidly and then subtract a 1mm logo from it - or send me a message ;-).
thingiverse
free
![jjrc h31 to 808 mini hd-camera (#16) board adapter by megic](/t/8647861.jpg)
jjrc h31 to 808 mini hd-camera (#16) board adapter by megic
...better lowlight performance - if you can accept the reds in your movies ;-). of course you have to adapt the focus a little then.
thingiverse
free
![RocketEd Rocket adapted to C6-5 by megic](/t/8644423.jpg)
RocketEd Rocket adapted to C6-5 by megic
...bout 365m as simulated. and before you ask - yes i made sure beforehand, that i was allowed to start under this preconditions ;-)
thingiverse
free
![dyson adapter by megic](/t/8656325.jpg)
dyson adapter by megic
...his one can turn around - i think it's an advantage - if you don't like it, you need to put little stoppers into the nut.
thingiverse
free
![Bravo Pump Air Intake Guard by megic](/t/8531187.jpg)
Bravo Pump Air Intake Guard by megic
...ame thickness as the base: it's on purpose!!! ;-) this way, the thing locks quite nicely to the thread, when fully srewed in.
thingiverse
free
![embossing forms "charity night" by megic](/t/8691833.jpg)
embossing forms "charity night" by megic
...se to press the 2 pieces firmly together. in order not to break them, you need to attach each of them to a piece of wood or so...
Backplane
thingiverse
free
![AM4 Bracket Adapter for Corsair AIO CPU Liquid Cooler Heatsink - USES EXISTING AM4 BACKPLANE & SCREWS by warlockpunched](/t/8121770.jpg)
AM4 Bracket Adapter for Corsair AIO CPU Liquid Cooler Heatsink - USES EXISTING AM4 BACKPLANE & SCREWS by warlockpunched
...y similar.
note: please re-download if you downloaded prior to 10/19/2020 @ 9:28am mst; the file i uploaded was the wrong one. xd
thingiverse
free
![Snapmaker 2.0 PSU Fan Adaptor by mkomuc](/t/8120911.jpg)
Snapmaker 2.0 PSU Fan Adaptor by mkomuc
...supply (psu) by a 40x40x10 fan without replacing the backplane i tapped the part for m3...
thingiverse
free
![Mount for MetalSub Tank Battery Mount 10L / 12L 172cm Diameter Twin / Double Scuba Diving Bottle / Tauchgerät Akkuhalterung Doppelflasche by dwolbeck](/t/8094020.jpg)
Mount for MetalSub Tank Battery Mount 10L / 12L 172cm Diameter Twin / Double Scuba Diving Bottle / Tauchgerät Akkuhalterung Doppelflasche by dwolbeck
...tank, the low profile version you use on the backplane side of the tank. you can connect the front...
thingiverse
free
![Mini ITX Case by hasechris](/t/8099030.jpg)
Mini ITX Case by hasechris
...ml310eg8 4 bay 3.5 lff sas/sata drive backplane board 686756-001https://www.ebay.de/itm/hp-proliant-ml310eg8-4-bay-3-5-lff-sas-sata-drive-backplaneboard-686756-001/183354515081 8x 3.5" lff 0m05tm dell poweredge t320 t420 t620...
thingiverse
free
![10" inch touch display Raspberry Pi backplane and stand by Phyti1](/t/8074072.jpg)
10" inch touch display Raspberry Pi backplane and stand by Phyti1
...and which got broken. it should fit the other parts fine and also has all other holes which are as close as i could measure them.
thingiverse
free
![Christmas Countdown Cubes v2 by brlittle](/t/8063563.jpg)
Christmas Countdown Cubes v2 by brlittle
...head.stl will include the beard, mustache, hatband, tassel, and backplane as a single element. if you want santa to...
thingiverse
free
![Magnetic mount for Unifi AP-AC-PRO by tdeutsch](/t/8069614.jpg)
Magnetic mount for Unifi AP-AC-PRO by tdeutsch
...wasn't able to put the magnets directly on the "backplanequot;, as the surface is not flat. so i took...
thingiverse
free
![Lenovo M73 / M93 SFF horizontal gpu mount by fearthis4](/t/8203114.jpg)
Lenovo M73 / M93 SFF horizontal gpu mount by fearthis4
...ventilation obstructions. the m73 has a knockout in the backplane that accepts a standard hdmi passthrough. i used standard...
thingiverse
free
![S100 8 slot Guide Rails by plasticuser](/t/8200972.jpg)
S100 8 slot Guide Rails by plasticuser
...curved to reduce fan noise, and will accept thicker backplane ...
thingiverse
free
![ControlLogix Power Supply Mount Cap by MorgenBenner](/t/8241183.jpg)
ControlLogix Power Supply Mount Cap by MorgenBenner
...not properly clear the screws and capacitor on the backplane pcb. forcing them into the chassis could damage the...
Printhead
3d_export
$24
![mechanical spider](/t/11704963.jpg)
mechanical spider
...to 3d-print complex structures using its integrated spool and printhead it can also be used for all your mechanical...
thingiverse
free
![Anet ET4 Dial Indicator Mount for Bed Levelling by peterfjorgensen](/t/8115437.jpg)
Anet ET4 Dial Indicator Mount for Bed Levelling by peterfjorgensen
...not make it possible to fit this on the printhead i found other designs on the interweb, but wanted...
thingiverse
free
![UpBox New Extruder Parts by Nilye](/t/8115550.jpg)
UpBox New Extruder Parts by Nilye
...increases noticably. i highly recomend cleaning nozzle and whole printhead regularily. please let me know if it helps....
thingiverse
free
![Raspberry Pi Cameraholder for Prusa MK3s by berschwer](/t/8149363.jpg)
Raspberry Pi Cameraholder for Prusa MK3s by berschwer
...z-calibration or use the full range of z-dimension the printhead may collide with the...
thingiverse
free
![Flying Bear Ghost 4, 4s | 2x4010 fans and BL Touch by Try2beHarder](/t/8150377.jpg)
Flying Bear Ghost 4, 4s | 2x4010 fans and BL Touch by Try2beHarder
...2x4010 fans and bl touch by try2beharder thingiverse universal printhead for original ghost 4 / 4s hotend. end new...
thingiverse
free
![Flying Bear Ghost 5 universal printhead (v2.0) with two 4010 fans by Sereggae](/t/8138799.jpg)
Flying Bear Ghost 5 universal printhead (v2.0) with two 4010 fans by Sereggae
...r ghost 5 hotend: https://youtu.be/qgdbfibfqcy
сказать "спасибо":
paypal.me/sereggae
money.yandex.ru/to/410011770112162
thingiverse
free
![Fast Swap E3D Printhead for V Slot 2020 E3D by Wampo](/t/8067447.jpg)
Fast Swap E3D Printhead for V Slot 2020 E3D by Wampo
...nd the contacts can handle more than 40ampshttps://de.aliexpress.com/item/4000346363994.html?spm=a2g0s.9042311.0.0.50174c4d2w96ul
thingiverse
free
![3D printer Cuboid 1.0 by Kaksdelat](/t/8136699.jpg)
3D printer Cuboid 1.0 by Kaksdelat
...the scale 1 to 2 percent more plastic shrinkage. printhead - 1pc. stepper_motor_holder_xy - 2 pieces, one straight and...
thingiverse
free
![Creator Pro Dual- glass clip [slim & simple] by PeterLindquist](/t/8135287.jpg)
Creator Pro Dual- glass clip [slim & simple] by PeterLindquist
...necessary but no more, now it just clears the printhead when pushing the travel boundaries. i also added a...
thingiverse
free
![Flying Bear Ghost 4s 40x15 Fan nozzle by AndrewK1975](/t/8135552.jpg)
Flying Bear Ghost 4s 40x15 Fan nozzle by AndrewK1975
...not force us to rework the clicker of the printhead ...
Hictop
thingiverse
free
![Hictop Tenlog D3 mount for MakerTech3D DSE by mrmikejackson](/t/8149417.jpg)
Hictop Tenlog D3 mount for MakerTech3D DSE by mrmikejackson
....thingiverse.com/thing:4613204
being tested for use by https://www.makertech3d.com/products/dual-switching-extruder-non-proforge
thingiverse
free
![I3 Clone Y-axis Chain Mounts by siskulous](/t/8146107.jpg)
I3 Clone Y-axis Chain Mounts by siskulous
...i made these for the y axis on my hictop 3dp-03 (an i3 clone). it was in desperate need...
thingiverse
free
![Silicone Wipe Bucket for Tenlog Hictop - Modified by mrmikejackson](/t/8141717.jpg)
Silicone Wipe Bucket for Tenlog Hictop - Modified by mrmikejackson
...that have farther offset.
i am using this as wiper for dual switching extruder upgrade: https://www.thingiverse.com/thing:4606909
thingiverse
free
![Support detecteur filament Titan pour Tenlog/Hictop by Baroudeur](/t/8147804.jpg)
Support detecteur filament Titan pour Tenlog/Hictop by Baroudeur
...ght displacement of the positioning of the detector, to put the filament more straight in relation to the opening of the extruder
thingiverse
free
![Hictop i3 Y endstop holder by siskulous](/t/8155493.jpg)
Hictop i3 Y endstop holder by siskulous
...ame up with. i've since learned that it was originally mounted on the y carriage. i'm fairly certain this is an improved.
thingiverse
free
![Aluminum Extruder Cable Support (Ender 3 + Others) by draxus42](/t/8205318.jpg)
Aluminum Extruder Cable Support (Ender 3 + Others) by draxus42
...bkvines. i had been using his design on a hictop aluminum extruder that i bought for my ender 3....
thingiverse
free
![Frontal fan and cooler for E3D V6 bowden carriage by INeDiA](/t/8242920.jpg)
Frontal fan and cooler for E3D V6 bowden carriage by INeDiA
...meshup of the remixed carriage and the 2-in-1 ultracompact hictop bowden mount from mmendel:...
thingiverse
free
![Ear Savers by ohioteentech](/t/8167609.jpg)
Ear Savers by ohioteentech
...fusion 360 and i printed it out on my hictop idex 3d printer. i recommend printing this out in...
thingiverse
free
![Adapters for Hictop Prusa I3 Spool Holder by siskulous](/t/8184292.jpg)
Adapters for Hictop Prusa I3 Spool Holder by siskulous
...having multiple spools on the spool holder worked better with a divider. at this point i'll just add adapters as i need them.
thingiverse
free
![Belt tensioner axis Y Prusa i3 by 3DWnico](/t/8260016.jpg)
Belt tensioner axis Y Prusa i3 by 3DWnico
...2 m4 screws belt tensioner designed for prusa i3 hictop but extensible for all prusa i3...
Hotend
thingiverse
free
![Ender 3 upgrade fanduct (might also fit Ender2/3Pro/5/CR10) by dadul96](/t/8114034.jpg)
Ender 3 upgrade fanduct (might also fit Ender2/3Pro/5/CR10) by dadul96
...ender2/3pro/5/cr10) by dadul96 thingiverse this mod dramatically improves the hotend performance of the ender 3. the "coldend" will be...
thingiverse
free
![Anycubic i3 mega direct Titan Aero by Kyneq](/t/8114167.jpg)
Anycubic i3 mega direct Titan Aero by Kyneq
...there is no need to change anything. design fits hotend vulcan and titan aero i've added versions of the...
thingiverse
free
![Hero Me Gen 5 base for Dragon Hotend by alwayshungry8](/t/8114565.jpg)
Hero Me Gen 5 base for Dragon Hotend by alwayshungry8
...original m2.5 screw hardware and bowden collet
mounts using 4 mounting screws instead of 2
now you can do 1 handed nozzle changes
thingiverse
free
![Soporte Hotend V6 by Ldelafuente](/t/8114727.jpg)
Soporte Hotend V6 by Ldelafuente
...soporte hotend v6 by ldelafuente
thingiverse
soporte hotend simple para impresoras casera convertible a cnc
thingiverse
free
![Direct drive extruder for FLSUN Cube by tato_713](/t/8115063.jpg)
Direct drive extruder for FLSUN Cube by tato_713
...33mm cut of the ptfe teflon tube in the hotend part. these couple were a big pain to me...
thingiverse
free
![UpBox New Extruder Parts by Nilye](/t/8115550.jpg)
UpBox New Extruder Parts by Nilye
...do not let the foil or tape to touch hotend here. what you need: ptfe tape (high temp resistant)...
thingiverse
free
![Geeetech | Dual Chimera Extruder Mount by Barns](/t/8148236.jpg)
Geeetech | Dual Chimera Extruder Mount by Barns
...printing and disassembling. version 0.3 - 16.10.2020 changed chimera hotend --> small changes to fan ducts improved printability version...
thingiverse
free
![Lerdge-X on Flying Bear Ghost 5 by Silirom](/t/8149554.jpg)
Lerdge-X on Flying Bear Ghost 5 by Silirom
...the controller fan is connected in parallel with the hotend fan. left without alteration. i soldered the usb extension...
thingiverse
free
![Creality CR-6 SE Power Off Autoswitch by ThingsDesigner](/t/8149766.jpg)
Creality CR-6 SE Power Off Autoswitch by ThingsDesigner
...present print m106 s0; turn-off fan m104 s0; turn-off hotend m140 s0; turn-off cond ; auto-off g4 s120; pause...
thingiverse
free
![Sidewinder X1 E3D V6 40mm Fan Duct by HenryCharlie](/t/8149888.jpg)
Sidewinder X1 E3D V6 40mm Fan Duct by HenryCharlie
...the e3d v6 hotend. it simply clips onto the hotend as the original fan duct. i used the noctua...
Diamond
3d_export
$15
![STL116 3D Model](/t/291628.jpg)
STL116 3D Model
...stl116 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$15
![STL100 3D Model](/t/291630.jpg)
STL100 3D Model
...stl100 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$15
![STL88 3D Model](/t/291631.jpg)
STL88 3D Model
...stl88 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$15
![STL101 3D Model](/t/291632.jpg)
STL101 3D Model
...stl101 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$15
![STL87 3D Model](/t/291633.jpg)
STL87 3D Model
...stl87 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$35
![Enchenment Wedding Band 3D Model](/t/283345.jpg)
Enchenment Wedding Band 3D Model
...enchenment wedding band 3d model 3dexport ring jewelry diamond sapphire white gold sterling silver engagement wedding stl cad...
3d_export
$35
![Gothic Ring 3D Model](/t/283488.jpg)
Gothic Ring 3D Model
...ring 3d model 3dexport ring jewel woman man jewelry diamond gift white gold silver gemstone precious finger platinum wedding...
3d_export
$15
![Earrings i 001 3D Model](/t/283538.jpg)
Earrings i 001 3D Model
...earrings i 001 3d model 3dexport earrings jewelry diamond searring apphire white gold sterling silver engagement wedding stl...
3d_export
$15
![Earrings i 022 3D Model](/t/283557.jpg)
Earrings i 022 3D Model
...earrings i 022 3d model 3dexport earrings jewelry diamond searring apphire white gold sterling silver engagement wedding stl...
3d_export
$22
![Ilaria 3D Model](/t/296741.jpg)
Ilaria 3D Model
...ilaria 3d model 3dexport bangle bracelate ring jewelry diamond jewels sapphire white gold sterling silver engagement wedding stl...
Ready
3d_export
$25
![3D Models Mixed Use Building 70 3D Model](/t/284171.jpg)
3D Models Mixed Use Building 70 3D Model
...lowpoly shop condo mixed use multi story city game ready vray scanline max 3d models mixed use building 70...
3d_export
$25
![Building 76 3D Model](/t/283313.jpg)
Building 76 3D Model
...store commercial shop street apartment lowpoly low poly game ready mod village downtown building 76 3d model vkmodels 72910...
3d_export
$25
![3D Models Building 78 3D Model](/t/283315.jpg)
3D Models Building 78 3D Model
...store commercial shop street apartment lowpoly low poly game ready mod village downtown 3d models building 78 3d model...
3d_export
$64
![Lion Head Door Knocker 3D Model](/t/283384.jpg)
Lion Head Door Knocker 3D Model
...ornate antique stone sculpture lock cat big statue game ready low lion head door knocker 3d model soulstice 77966...
3d_export
$25
![3D Models Building 85 3D Model](/t/283389.jpg)
3D Models Building 85 3D Model
...commercial store residential retail shop apartment hotel lowpoly game ready 3d max vray scanline 3d models building 85 3d...
3d_export
$26
![Pakistan HatfIII SRBM Missile 3D Model](/t/283420.jpg)
Pakistan HatfIII SRBM Missile 3D Model
...short range ballistic guided system projectile nuclear weapon game ready 3ds cob pakistan hatfiii srbm missile 3d model visualmotion...
3d_export
$6
![Western house low poly 3D Model](/t/283435.jpg)
Western house low poly 3D Model
...3d model 3dexport home west western house old game ready low poly build western house low poly 3d model...
3d_export
$25
![3D Models Building 65 3D Model](/t/283473.jpg)
3D Models Building 65 3D Model
...flat condo commercial balcony mixed use multi story game ready street city 3d models building 65 3d model vkmodels...
3d_export
$25
![3D Models Building 55 3D Model](/t/283523.jpg)
3D Models Building 55 3D Model
...condo hotel brick mixed use multi story detailed game ready 3d models building 55 3d model vkmodels 70262...
3d_export
$19
![Pakistan HatfI BSRSM Missile 3D Model](/t/296460.jpg)
Pakistan HatfI BSRSM Missile 3D Model
...military battle field ballistic unguided projectile nuclear weapon game ready 3ds cob dxf obj directx pakistan hatfi bsrsm missile...