Thingiverse
Hi-Z Core XY triple leadscrew by vronp
by Thingiverse
Last crawled date: 4 years, 5 months ago
Frame Dimensions: 340x340x735
Design based on the following:
http://www.thingiverse.com/thing:393155http://www.thingiverse.com/thing:612857http://www.thingiverse.com/thing:364426http://www.thingiverse.com/thing:15718
Sailfish firmware: http://www.thingiverse.com/thing:32084
I'll upload files as the build progresses. My goal is to create a "hyper-accurate" BOM (costs, etc) based on the BOM from 393155. I've spent countless hours reviewing the projects listed above and sent countless questions to the authors. The advantage for anyone deciding to do this build is that one should be able to just order the parts and assemble the printer.
Pictures for this build are located here:
https://www.flickr.com/photos/27637384@N05/sets/72157652106546623/with/18535184058/
I will be producing a lot of pictures.
In the files section I will be labeling certain files as "InfoOnly". These will be included for various purposes, primarily to aid in the visualization of the various printed parts. These may be solid model files that you could use to tweak the parts.
Everything else should be a file you need in order to print or cut the part, or the BOM itself. There is ONE exception to this. I have included both belt clip files as I have not yet figured out which one I don't need. Somewhere near the end of this project, I'll have this figured out and I'll then remove the piece that is not needed.
Again, my hope is to save you the time involved in picking through files (and other projects) to obtain everything you need to reproduce this build. I'm also attempting to eliminate the "choices" I had to make as I evaluated the other designs. This is my distillation as the "best" selection of parts and approach. My opinion of course!
I want to thank all those who contributed to the evolution of this design. I want to especially thank the authors of the thing sites listed above for their patience in answering my MANY questions.
Design based on the following:
http://www.thingiverse.com/thing:393155http://www.thingiverse.com/thing:612857http://www.thingiverse.com/thing:364426http://www.thingiverse.com/thing:15718
Sailfish firmware: http://www.thingiverse.com/thing:32084
I'll upload files as the build progresses. My goal is to create a "hyper-accurate" BOM (costs, etc) based on the BOM from 393155. I've spent countless hours reviewing the projects listed above and sent countless questions to the authors. The advantage for anyone deciding to do this build is that one should be able to just order the parts and assemble the printer.
Pictures for this build are located here:
https://www.flickr.com/photos/27637384@N05/sets/72157652106546623/with/18535184058/
I will be producing a lot of pictures.
In the files section I will be labeling certain files as "InfoOnly". These will be included for various purposes, primarily to aid in the visualization of the various printed parts. These may be solid model files that you could use to tweak the parts.
Everything else should be a file you need in order to print or cut the part, or the BOM itself. There is ONE exception to this. I have included both belt clip files as I have not yet figured out which one I don't need. Somewhere near the end of this project, I'll have this figured out and I'll then remove the piece that is not needed.
Again, my hope is to save you the time involved in picking through files (and other projects) to obtain everything you need to reproduce this build. I'm also attempting to eliminate the "choices" I had to make as I evaluated the other designs. This is my distillation as the "best" selection of parts and approach. My opinion of course!
I want to thank all those who contributed to the evolution of this design. I want to especially thank the authors of the thing sites listed above for their patience in answering my MANY questions.