Thingiverse
HGLRC veyron 3 cinewhoop full duct by Autocharge
by Thingiverse
Last crawled date: 4 years, 10 months ago
Full and 1/2 ducts for the HGLRC veyron 3 cinewhoop.
Printed as 80% infill with supports print one full duct at a time
Ducts should fit a 3" prop
For full ducts you will have to cut and remove some of the blue sponge to reduce stress pushing on the ducts, cut with sharp knife and keep safe so you could glue back.
Caution not to trap or cut wires.
1/2 ducts are replacements but are thicker than originals also stronger.
All modifications are done at your own risk, I take no responsibility for damage caused in in use or fitting of the ducts.
Printed as 80% infill with supports print one full duct at a time
Ducts should fit a 3" prop
For full ducts you will have to cut and remove some of the blue sponge to reduce stress pushing on the ducts, cut with sharp knife and keep safe so you could glue back.
Caution not to trap or cut wires.
1/2 ducts are replacements but are thicker than originals also stronger.
All modifications are done at your own risk, I take no responsibility for damage caused in in use or fitting of the ducts.