Thingiverse
Hex Speaker Enclosure for Tectonic Elements 3.5" BMR by Emotiva
by Thingiverse
Last crawled date: 4 years, 6 months ago
Small sealed enclosure for Tectonic Elements 3.5" BMR full range driver. This enclosure is too small to utilize the low end capabilities of the driver but more suitable where space is an issue.
My other speaker designs at the moment:TE 3.5" BMR BookshelfDayton Audio RS100TB W3-881SJFTB W3-2108 Micro Sub
Holes are designed into the back for separate binding posts - check the spacing if you intend to use a connected pair.
No supports required. As with all of these designs, you might want to print only the 'front' several mm to first check the fit of your driver.
I used 3mm button heads to mount the driver.
My other speaker designs at the moment:TE 3.5" BMR BookshelfDayton Audio RS100TB W3-881SJFTB W3-2108 Micro Sub
Holes are designed into the back for separate binding posts - check the spacing if you intend to use a connected pair.
No supports required. As with all of these designs, you might want to print only the 'front' several mm to first check the fit of your driver.
I used 3mm button heads to mount the driver.