Thingiverse
HEVO modular Direct Extruder and Mount by theredguy
by Thingiverse
Last crawled date: 4 years, 6 months ago
Modular direct extruder for e3D Titan hotend.
Required parts:
DSUB15 (VGA) connector
2X 40x40 blower fans
Small micro switch (X min)
Best to print in ABS as some parts require gluing. Also, painted with heat resistant radiator paint to protect the plastic. The bottom area close to the heater covered with PTFE coated fiberglass high temperature tape + Kapton tape on top.
Required parts:
DSUB15 (VGA) connector
2X 40x40 blower fans
Small micro switch (X min)
Best to print in ABS as some parts require gluing. Also, painted with heat resistant radiator paint to protect the plastic. The bottom area close to the heater covered with PTFE coated fiberglass high temperature tape + Kapton tape on top.