Thingiverse
HeroMe Gen5 SpeedDrive Lite by tomohulk
by Thingiverse
Last crawled date: 3 years, 1 month ago
So, back when I used the Bullseye, there was a "SpeedDriveLite" version of the mount that used 0 supports and worked just as well. I was unable to find that model, else I would attribute this as a remix of that. Anyway, I tired to duplicate that for HeroMe Gen5, but, sadly, I still had to use supports. but either way, uses way less plastic than most of the other versions out there, and works amazing. This is only tested with the stock extruder and stepper and with the HeroMe Gen5.
Similar models
thingiverse
free
HeroMe Gen5 Base for MicroSwiss Direct Drive + Linear Rails by absorbthefuture
...ls by absorbthefuture
thingiverse
i remixed the herome base to work for my setup with micro swiss direct drive and linear rails.
thingiverse
free
A10v4 HeroMe Gen5 Gantry Adapter by nico85ar
...adapter by nico85ar
thingiverse
this is my design to adapt the gantry of a geeetech a10v4 to a herome gen5 e3d v6 customization.
thingiverse
free
Parametric remake of Hero Me Gen 5 BLTouch mounts by retsamedoc
...erome base (https://www.thingiverse.com/thing:4555571) and the herome gantry adapter (https://www.thingiverse.com/thing:4530852).
thingiverse
free
HeroMe5 Gantry clip 4v2 by BioBirk
...herome5 gantry clip 4v2 by biobirk
thingiverse
revised gantry clip from herome gen5.
thingiverse
free
Linear Rail Direct Drive BMG HeroMe Gen5 Ender 5 adapter by alucard321pl
... together so that the https://www.thingiverse.com/thing:3782865 modification would fit my herome gen 5 with bmg and direct drive.
thingiverse
free
HeroMe Gen5 Ender3v2 Mount by mikeybme
...m y-offset made no sense to me, so i ditched it and merged the gantry adapter with the base (less screws and nuts to fight with).
thingiverse
free
HeroMe Gen5 MDDv1.3 Bondtech BMG Right / E3D Adapter v2 by Horizon3d
...eave a small gap between the bondtech adapter, and the herome gen5 hotend base allowing you to bolt the adapter to the mdd plate.
thingiverse
free
SpeedDrive - Ender 3 - BMG & HeroMe Gen5 - Remix by grimr33f3r
...mr33f3r
thingiverse
slicing issues on original file, filled in gaps to fix. all credit to previous uploads, i just filled it in.
thingiverse
free
Direct Drive extruder mount for Ender 5 plus with chain (HeroMe Gen5 remix) by Iveusse
... link from gnizten (https://www.thingiverse.com/thing:4116655)
this version has a 9mm y offset to be compatible with herome gen 5
thingiverse
free
Ender 3 V2 - HeroMe Gen5 DirectDrive MOD by breaktech
...anually that your motor is not crushing in the frame before the endstop is activated. it if works please leave a comment, thanks.
Tomohulk
thingiverse
free
Danby Tap Tower Opening Cover by tomohulk
...e
i use an old danby kegerator to ferment in, and i have removed the tap tower, this is a cover to fill that opening on the top.
thingiverse
free
Alien Head by tomohulk
...d out with meshmixer and then scaled up in cura.
ps its a work in progress because i want to add some way to hang it on the wall.
thingiverse
free
Ender3 2020 TUSH by tomohulk
...s very secure, does not twist, and can be adjusted for wider spools.
needs 4 skateboard wheel bearings, and m3x14 bolts and nuts.
thingiverse
free
BrewPiLess Enclosure by tomohulk
...etty good, and i put a little dab of glue on it.
(i couldn't find models for the 5v power supply or the mini xlr connectors).
thingiverse
free
Zuca All Terrain Cart Fender by tomohulk
...them together. clear coated after to hopefully stop the screws from rusting. save the 50 bucks from buying these from zuca lol.
thingiverse
free
Iron Man Arc Reactor Stand - Round Base
...you also need to print the other files from tomohulk happy...
thingiverse
free
Ender3 Z Axis Lead Screw Stock Mount Replacement by tomohulk
...on my z axis:
z motor mount: https://www.thingiverse.com/thing:4699747
z screw support: https://www.thingiverse.com/thing:3032811
thingiverse
free
Iron Man Arc Reactor Mark I (Remixed)
...designed a bevel, took the svg text file from tomohulk designed a stand for 10mm rod (the stainless steel...
Speeddrive
thingiverse
free
Speeddrive v1 (remixed) by Astraeous
...e spacers into it. so, i changed the holes to the size of the spacers. don't need to put spacers on it and works fine for me.
thingiverse
free
Hero Me Gen4 - E3V2 + Speeddrive by 81dorado
...gen 4 ducts. the base lock requires 1 m3 nut to be pressed in, and the base requires 4 m3 nuts for the ducting like the original.
thingiverse
free
speedDrive - Ender 3 direct drive mount remix by mrares
...rive mount remix by mrares
thingiverse
this remix adds strain relief and other accessory mounting holes to the speeddrive mount.
thingiverse
free
SpeedDrive Remix for X axis linear rail by seanauff
...drive that adjusts the mounting holes slightly to work with an x axis linear rail mod. i also added a cable tie attachment point.
thingiverse
free
Aquila SpeedDrive w/ BMG and Pancake by Ashtc
...aquila speeddrive w/ bmg and pancake by ashtc
thingiverse
for the voxelab aquila, remix of the remix for the ender 3 v2.
thingiverse
free
SpeedDrive Remix: Pancake Stepper + Cable Chain by unrelentingtech
... the extruder is mounted on this speeddrive (or the stock one – this remix does not change the stepper's location of course).
thingiverse
free
SpeedDrive for E3D V6 + BMG extruder + Cable clip
...michaw (https://www.thingiverse.com/thing:3475424). i have not tested the later combination in real life yet, but it should work.
thingiverse
free
Filament guide for SpeedDrive extruder system (Ender3) by justasg
...nfill
this is made to be too high as there are different extruder part diameters - just file it down (that is why it's 100%)
thingiverse
free
SpeedDrive Remix: Hero Me Gen 5 + Cable Chain by unrelentingtech
...k speeddrive to be able to use the hero me gen 5! the hmg5 and the dual gear extruder have the same offset for the filament path.
thingiverse
free
SpeedDrive for Hero Me Gen5 + BMG with Cable Clip connector by NovaXeros
...mes, so providing you use this with a pancake stepper (why else would you be using a bmg if not), then you're cooking on gas.
Herome
thingiverse
free
HeroMe Ender3 Sherpa Mini Mount by theFPVgeek
...herome ender3 sherpa mini mount by thefpvgeek
thingiverse
herome ender3 sherpa mini mount - untested
thingiverse
free
A10v4 HeroMe Gen5 Gantry Adapter by nico85ar
...adapter by nico85ar
thingiverse
this is my design to adapt the gantry of a geeetech a10v4 to a herome gen5 e3d v6 customization.
thingiverse
free
Pen holder HeroMe Gen 5 by Pakoach
...remix to do 2d printing with your printer.
i adapted the pen holder to fit the herome gen 5.
it will need the abl mount to put it
thingiverse
free
HeroMe Gen5 Base for MicroSwiss Direct Drive + Linear Rails by absorbthefuture
...ls by absorbthefuture
thingiverse
i remixed the herome base to work for my setup with micro swiss direct drive and linear rails.
thingiverse
free
V6 HeroMe Bowden Mashup by Hometinker12
... the carriage on the rail first
install the herome base and hotend
connect and tension belts
install the x-endstop/wiremanagement
thingiverse
free
HeroMe V5 tinkercad remix for BondTech DDX by sebbzor
...ersion of ddx (v3) that was released march 2021 by bondtech.
this piece was designed around bondtech ddx v2 for creality ender.
thingiverse
free
HeroMe Gen5 Ender3v2 Mount by mikeybme
...m y-offset made no sense to me, so i ditched it and merged the gantry adapter with the base (less screws and nuts to fight with).
thingiverse
free
Linear Rail Direct Drive BMG HeroMe Gen5 Ender 5 adapter by alucard321pl
... together so that the https://www.thingiverse.com/thing:3782865 modification would fit my herome gen 5 with bmg and direct drive.
thingiverse
free
V6 HeroMe Direct Drive Mashup by Hometinker12
... first
install the herome base and hotend
connect and tension belts
install extruder/stepper
install the x-endstop/wiremanagement
Gen5
thingiverse
free
Z-Wave Plus Z-Stick GEN5
...z-wave plus z-stick gen5
thingiverse
for the key : z-wave plus z-stick gen5
to put on the wall
thingiverse
free
A10v4 HeroMe Gen5 Gantry Adapter by nico85ar
...adapter by nico85ar
thingiverse
this is my design to adapt the gantry of a geeetech a10v4 to a herome gen5 e3d v6 customization.
thingiverse
free
Fossil Gen5 carlyle charging stand
...fossil gen5 carlyle charging stand
thingiverse
printed on a i3 mega
20% infill
resolution: 0.2
support: yes
thingiverse
free
Glock GEN5 extended magrelease by DarkTech
...tended magrelease by darktech
thingiverse
extended ambidex magrelease for glock gen 4/5. is about 1mm extended vs. the original.
thingiverse
free
Hero Me Gen5 12mm Probe Mount by MisterShoes01
...nd ender 5. print in default orientation with no support. i did 3 or 4 walls with moderate infill. it's not super important.
thingiverse
free
BFP Touch Wing for Hero Me Gen5 by arjmka
...bfp touch wing for hero me gen5 by arjmka
thingiverse
i just make it longer for bfp touch
thingiverse
free
Laser Adapter for Hero Me Gen5 - Remix by Eddie1505
...nd designed it to fit my laser mount holes. it fits perfectly for my ender 3 pro. for stability i increased the perimeter counts.
thingiverse
free
HeroMe Gen5 Ender3v2 Mount by mikeybme
...m y-offset made no sense to me, so i ditched it and merged the gantry adapter with the base (less screws and nuts to fight with).
thingiverse
free
Hero Me Gen5 mod for Ender 5 + with Micro Swiss Direct Drive by GavinByrne
...created the connector between the two 5015 fans to stop them being loose.
hero me gen5: https://www.thingiverse.com/thing:4460970
Lite
thingiverse
free
DS Lite Stylus
...ds lite stylus
thingiverse
ds lite stylus.
thingiverse
free
Huawei p20 Lite
...huawei p20 lite
thingiverse
great docking station for huawei p20 lite.
thingiverse
free
Lite Kroozer by Tsubureru
...lite kroozer by tsubureru
thingiverse
lite kroozer suitable for battlefleet gothic or similar space games.
thingiverse
free
Hornet XTpro Lite by Lynxtouchl5210
...hornet xtpro lite by lynxtouchl5210
thingiverse
a slinghsot that is lite :)
thingiverse
free
GoPro Lite Mount by DonMigel
...gopro lite mount by donmigel
thingiverse
gopro lite mount
thingiverse
free
MAG-LITE HOLDER by Sautech
...mag-lite holder by sautech
thingiverse
mag-lite holder
thingiverse
free
DS Lite Volume Slider
...ds lite volume slider
thingiverse
ds lite volume slider.
thingiverse
free
Taranis x9 Lite things
...taranis x9 lite things
thingiverse
somethings to taranis x9 lite
thingiverse
free
wind5 Lite by NoxesOne
...wind5 lite by noxesone
thingiverse
.
thingiverse
free
Huawei P30 Lite Case
...huawei p30 lite case
thingiverse
this is the case for cell phone huawei p30 lite.