Thingiverse
Heptagonal Prism Twisty Puzzle by kequals
by Thingiverse
Last crawled date: 4 years, 6 months ago
My fully-functional heptagonal (7-sided) prism twisty puzzle. The top and bottom layers can turn by ~51 degrees and the side layers can turn by 180 degrees. This puzzle is proportional to a 4x4 instead of a 3x3, as it would be too large if it were proportional to a 3x3.
To make this puzzle, print each part by the number indicated on the filename:
1 Core
2 Top Center
2 Top Center Cap
7 Side Center
7 Side Center Cap
14 Top Edge
7 Middle Edge
14 Corner
You need 9 M3 screws and 9 springs. Standard 3x3 screws can be used, and they can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The stickers on the 3x3 side faces are standard 62mm 4x4 stickers. The top and bottom stickers can be cut from the sticker template.
To make this puzzle, print each part by the number indicated on the filename:
1 Core
2 Top Center
2 Top Center Cap
7 Side Center
7 Side Center Cap
14 Top Edge
7 Middle Edge
14 Corner
You need 9 M3 screws and 9 springs. Standard 3x3 screws can be used, and they can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The stickers on the 3x3 side faces are standard 62mm 4x4 stickers. The top and bottom stickers can be cut from the sticker template.