Thingiverse
Helping Hands - WORK IN PROGRESS
by Thingiverse
Last crawled date: 5 years, 10 months ago
This is a work in progress print.
Ill admit, the print tolerances are not the best. I tell myself its because I wanted to spend time sanding it to make it nice and smooth, but in reality its because I'm still learning and this is one of my first designs in fusion 360, and one of my first "functional" prints that really needed consideration of printing tolerances.
OBJ file is included in the file set, so feel free to tweak, change etc.
I do intend to update it eventually.... honest.
Update 14/11/19:
After having used it, I recognise a couple of updates to add to the mod list, and for you to be aware of if you print.
1) I don't need the pot., so the second hole is moot.
2) The locking clamp is too low when working on smaller boards.
3) It needs some feet, either stuck on, or printed, on the bottom cover
Ill admit, the print tolerances are not the best. I tell myself its because I wanted to spend time sanding it to make it nice and smooth, but in reality its because I'm still learning and this is one of my first designs in fusion 360, and one of my first "functional" prints that really needed consideration of printing tolerances.
OBJ file is included in the file set, so feel free to tweak, change etc.
I do intend to update it eventually.... honest.
Update 14/11/19:
After having used it, I recognise a couple of updates to add to the mod list, and for you to be aware of if you print.
1) I don't need the pot., so the second hole is moot.
2) The locking clamp is too low when working on smaller boards.
3) It needs some feet, either stuck on, or printed, on the bottom cover