Thingiverse
Helicopter 2x2 Twisty Puzzle V2 by kequals
by Thingiverse
Last crawled date: 4 years, 7 months ago
V2 of My fully functional helicopter 2x2 puzzle. It turns much better and is more robust than v1. I changed the inner 2x2 mechanism and modified the helicopter cube mechanism to turn better.
This puzzle combines the moves of a helicopter cube and a 2x2. The edges can turn 180 degrees and jumble, while the faces can turn in increments of 90 degrees.
To make this puzzle, print each part by the number indicated on the filename:
7 2x2 Corner
1 2x2 Alignment
3 2x2 Center
9 2x2 Edge
24 Helicopter Center
24 Helicopter Wing
8 Helicopter Corner
You need 4 M3x12mm screws and 4 springs. You can buy the springs from here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The screws for this puzzle I found laying around in my house. The screws in the link above are too long, so you need to find shorter screws. The ones I used were 12mm long.
Stickers can be cut from the template, or you can use helicopter cube stickers.
This puzzle combines the moves of a helicopter cube and a 2x2. The edges can turn 180 degrees and jumble, while the faces can turn in increments of 90 degrees.
To make this puzzle, print each part by the number indicated on the filename:
7 2x2 Corner
1 2x2 Alignment
3 2x2 Center
9 2x2 Edge
24 Helicopter Center
24 Helicopter Wing
8 Helicopter Corner
You need 4 M3x12mm screws and 4 springs. You can buy the springs from here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The screws for this puzzle I found laying around in my house. The screws in the link above are too long, so you need to find shorter screws. The ones I used were 12mm long.
Stickers can be cut from the template, or you can use helicopter cube stickers.