Thingiverse
Headplay FPV battery case by miharix
by Thingiverse
Last crawled date: 3 years ago
Old battery of my Headplay FPV googles was bad.
I disordered the PCB and all smd components except the 10K voltage divider resistor.
Then I flipped the black connector so I could connect it when the PCB was flat in the liberator.
Next the PCB was epoxy glued.
The battery is now GENS ACE 4000MAH 7.4V 30C 2S1P HC 9
And the extended case is 3Dprinted.
There are 2 stl files. One is ca. 40% deeper then other.
The source files(FeeCAD) are for the smaller, so you can change the writing on the bottom.
I disordered the PCB and all smd components except the 10K voltage divider resistor.
Then I flipped the black connector so I could connect it when the PCB was flat in the liberator.
Next the PCB was epoxy glued.
The battery is now GENS ACE 4000MAH 7.4V 30C 2S1P HC 9
And the extended case is 3Dprinted.
There are 2 stl files. One is ca. 40% deeper then other.
The source files(FeeCAD) are for the smaller, so you can change the writing on the bottom.
Similar models
thingiverse
free
Headplay FPV battery mount by Mysabre73
...t; style mount on the back of the headset.
i used supports at 10% infill with .25mm layers. it took less than an hour to print.
thingiverse
free
FPV goggle battery case pcb protector by himitsudesu
... goggle battery case pcb protector by himitsudesu
thingiverse
this is for battery charge meter protector for remex linked model.
thingiverse
free
RX9850 case for Headplay goggle by wohenzhuce
... soldered on top of the pcb.
ps: the definition of this aviation connector is: 1. video in; 2. audio in; 3. gnd; 4.positive wire
thingiverse
free
4s Battery Pack Case by bonzailyte
...kyzone fpv goggles with a 4s battery, so i made a battery pack case for 4s battery with belt clip ;) fits 4 standard 18650 cells.
thingiverse
free
dji fpv Battery cover by flux_1800
...e battery does not hit the ground when landing and taking off. i used double-sided tape to connect it to the drone's battery.
thingiverse
free
FAT SHARK 18650 CASE + LEDS by giek2000
... leds by giek2000
thingiverse
simple case to hold 2 18650 batteries for fpv gear with space for the fat shark voltage check pcb.
grabcad
free
FPV Micro CASE
...fpv micro case
grabcad
increased strength.
the original is so fragile that a lot of pcb failures occur.
thingiverse
free
Nano QX FPV Case with Side Pouches by dgwinner
... so tiny.
i've done a test print of just the battery holder, and it works perfectly. i'll be doing a full run shortly.
thingiverse
free
Headplay Battery Holder by Cloudsmasher
...headplay battery holder by cloudsmasher
thingiverse
a small battery holder for the gopro mount.
thingiverse
free
HeadPlay HD FPV Headset Battery Holder (any battery) by nigobo
...dated version don't hesitate to contact me.
if you don't have access to a 3d printer i can print you one for a small fee
Miharix
thingiverse
free
Linux Penguin Tux by miharix
.../www.thingiverse.com/thing:519445
i added simple ayes, bigger base and in front text "linux" and back "gnu"
thingiverse
free
PCB box generator by miharix
...protect the pcb bottom from mount surface
and to be simply glued to the mount area while allowing the pcb to simply slide in/out.
thingiverse
free
Simple Roller Chain by miharix
...ent using heat (https://youtu.be/syvrogx2drk)
put a drop of ca to inside elements
the ketna_zobnik*.stl are gears for this chain.
thingiverse
free
xylophone robot by miharix
...blem.
here a simple test - full octave and short slovenian folklore song "čuk se je oženil"https://youtu.be/nvivg6_hdsu
thingiverse
free
Kossel mini enclosure by miharix
...holder needed.
also you need:
12x m4 20mm screw
12x m4 10mm wing nut
12x m3 screw
12x m4 hex nut
3x 2mm plexi glass (cca 375x500)
thingiverse
free
Sony bloggie MSH-PM5 stereo-microscope 1MISTBMS133 adapter by miharix
... captured video: http://youtu.be/v7eeienwmdq
*msh-pm5 has fixed focus so all focusing is made turning the knobs on 1mistbms133.
thingiverse
free
Generator for learning Isometric & orthogonal projection by miharix
...vensko podrobno razlago kako narišemo predmet, ki se zgenerira z privzetimi nastavitvami te skripte: https://youtu.be/exyihsyqk7s
Headplay
thingiverse
free
RX9850 case for Headplay goggle by wohenzhuce
... soldered on top of the pcb.
ps: the definition of this aviation connector is: 1. video in; 2. audio in; 3. gnd; 4.positive wire
thingiverse
free
Headplay Battery Holder by Cloudsmasher
...headplay battery holder by cloudsmasher
thingiverse
a small battery holder for the gopro mount.
thingiverse
free
Headplay True-D Diversity Pro 5805 by Kryptoo
...headplay true-d diversity pro 5805 by kryptoo
thingiverse
true-d diversity 5805 pro mod für die headplay hd.
thingiverse
free
Headplay HD Goggle SMA Antenna Mount by carrera0to60
... goggles to mount a patch style antenna. requires an extension to go from the stock antenna location to the front of the goggles.
thingiverse
free
Headplay RHO-Lens Holder by Seamongrel
...e rho-lens on the nose bridge and push down onto the double sided tape.
the rho-lens is from here: http://rho-lens.com/index.html
thingiverse
free
Headplay FPV battery mount by Mysabre73
...t; style mount on the back of the headset.
i used supports at 10% infill with .25mm layers. it took less than an hour to print.
thingiverse
free
Headplay FatShark-Like Bay Dock by Ashade
...u can just plug the module, position it, and glue it.
i have also added a vertical, plain version for other non-headplay goggles.
thingiverse
free
True-D Mount for Headplay SE FPV Goggles by jaymaster2000
...can be figured out by looking at the existing video receiver wiring layout, the pcb has markings indicating which wire does what.
thingiverse
free
LaForge Diversity V2 Module (Buttons) for Headplay HD Headsets by Fredgineer
...g feature.
the idea was to make the laforge integration look as clean as possible.
it takes about a few hours to do all the work.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Battery
3d_ocean
$2
Battery
...battery
3docean
battery electronic
a high quality battery .
3d_export
free
battery
...battery
3dexport
battery
3d_ocean
$5
Battery
...battery
3docean
battery electronics
a classic 6 v battery, high poly with materials
3d_ocean
$3
Batteries
...batteries 3docean aa aaa batteries battery d electronics energy materials power subdivision uv unwrapped aa,...
3d_export
$19
Lead-acid battery storage battery lithium battery
...ttery storage battery lithium battery
3dexport
1.lead-acid battery storage battery lithium battery 2.files include 3dmax obj fbx
3d_ocean
$7
Battery Model
...battery model
3docean
big battery car battery vehicle battery
car battery, big battery, vehicle battery.
3ddd
free
battery energier
...battery energier
3ddd
battery energier , батарейка
battery energier
turbosquid
free
battery
...battery
turbosquid
free 3d model battery for download as obj on turbosquid: 3d models for games, architecture, videos. (1151676)
3d_ocean
$1
Battery Model
...lack minus plus white yellow
this is battery model is about 1000 triangles. turntable preview is smoothed version of the battery.
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.