Headphone Stand (aka. The Duck) by Kivak

Last crawled date: 3 years, 4 months ago

A headphone stand (aka. "The Duck") I created for people with smaller print beds (like mine). Instead of printing the entire stand out in one piece, this uses 6 pieces fitted together with interlocking blocks (and glue). The longest diagonal, which is on the wings, is 186mm.
This was built custom tailored for the Corsair Void headset (while plugged into USB charger). However, the clearance is such that most headphones should work.
Update 2017-05-06:
After using the headphone stand for a while, I noticed the cushioned headphones started getting a little dented where they contacted the headphone rest. So I created a wide version of the headphone rest to spread the weight out a bit more. If you have not glued the headphone rest on, you should be able to just swap the regular one our for the new wide version. Check out printing instructions because they are slightly different.
Disclaimer: I have tested this on my own headsets (which are wireless and >2lbs). However, I don't accept any responsibility for damage to headsets if the headset and/or stand breaks. Although I've never had it break even with constant usage.