Headlamp battery holder by gaddman

Last crawled date: 2 years, 12 months ago

Battery holder for a headlamp. Two parts - the bracket which is designed to attach to elastic webbing, and a cage to hold the battery. Press fit and glue together.
Recommended improvements:
The tolerance was a bit tight and I had to file down the bracket to press into the guage - take 0.1mm off each side of the square blocks on the bracket.
It's a little sharp for something you wear - round all the corners.
The spacing of the mesh grid isn't quite even vertically and horizontally, so it can only hang vertically below the bracket - even up the spacing and you could have the choice.