Thingiverse
HDB Support (Head Development Board Support) for FABtotum by FABtotum
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a printable support for HDB, Head Development Board for the FABtotum Personal Fabricator.
It is necessary if you don't want to use the original covers contained in the head development kit (eg: you have to make something bigger).
After printing, remove the 4 small supports that hold up the teeth of the support.
The Board, the lasercut aluminium support and the orginal covers can be purchased as a kit here:https://store.fabtotum.com/eu/products/head-development-kit.html
To find the details about the communication protocol, sample sketches and documentation, check the github page: https://github.com/FABtotum/Head-Development-Kit
Edit (16/11/16): Updated version with correct scale factor.
It is necessary if you don't want to use the original covers contained in the head development kit (eg: you have to make something bigger).
After printing, remove the 4 small supports that hold up the teeth of the support.
The Board, the lasercut aluminium support and the orginal covers can be purchased as a kit here:https://store.fabtotum.com/eu/products/head-development-kit.html
To find the details about the communication protocol, sample sketches and documentation, check the github page: https://github.com/FABtotum/Head-Development-Kit
Edit (16/11/16): Updated version with correct scale factor.