Thingiverse
Harry Potter Wand Hooks
by Thingiverse
Last crawled date: 6 years, 2 months ago
This is a very basic wand hook for single or multiple wand display. We have been collecting wands for awhile and wanted to display them on the wall. We chose picture frames with the Marauders Map as the background. A simple way to hold the wands was needed without drawing too much attention to the hooks themselves.
There are 2 parts to this hook setup - the wand hook and insert.
Wand Hook - This is screwed into the picture frame using 1/2" #2 wood screws.
Inserts - These are used for the wand tips. Different wands have slightly larger/smaller tips so be sure to measure or test fit an insert. The reason for the inserts is to keep the wands firmly in place.
Each end of the wand gets a hook. The tip will get an appropriately sized insert to keep the wand from moving around AND to help level the wand. The insert should be glued into place using CA or hot glue. Enjoy!
There are 2 parts to this hook setup - the wand hook and insert.
Wand Hook - This is screwed into the picture frame using 1/2" #2 wood screws.
Inserts - These are used for the wand tips. Different wands have slightly larger/smaller tips so be sure to measure or test fit an insert. The reason for the inserts is to keep the wands firmly in place.
Each end of the wand gets a hook. The tip will get an appropriately sized insert to keep the wand from moving around AND to help level the wand. The insert should be glued into place using CA or hot glue. Enjoy!