Thingiverse
Hardbody Slotcar chassis by SlotcarBrad
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a hardbody slotcar chassis that I built to fit an old Edsel model car.The guide holder needs to be glued,screwed, or melted to the chassis after making sure it has room for the body. It needs a 16D motor and all the other parts to complete. A guide shoe can be found on Thingiverse, and printed to save 5$. It is also possible to design front wheels, and save another 10. You will need longer than normal screws to mount the motor.
Similar models
thingiverse
free
Hardbody Racing Slotcar by SlotcarBrad
...ld the motor tight without torqueing the screws too hard. the guide holder can be flipped to reach down if you have larger tires.
thingiverse
free
Outlaw Hardbody Chassis by SlotcarBrad
...ing the perfect position. it takes a 16d motor and small wheels. it has 2 positions for the front axle, to give you more options.
thingiverse
free
PDHPFF Chassis for 1/43 slotcar Renaul Clio diecast by pfuetze
...o
will accept carrera go! motor and rear axle
made for 2.38mm axles with ball bearings
for rotating guides with 3mm stem diameter
thingiverse
free
1/43 frontwheeldrive slotcar chassis by pfuetze
... 10x10x20mm
designed for 2mm axles with ball bearings. (2x5x2.3 sf682zz)
fits gearing 8/24, 8/20, 10/24, 10/20, 12/24 and 12/20
thingiverse
free
Anglewinder Slotcar Chassis by SlotcarBrad
...he points cut off can hold the lexan body on, but make sure you tape over them so they won't fall out and end up in the slot.
thingiverse
free
Anglewinder by SlotcarBrad
...it also takes the round axle bushings that most slotcars use. the bushings will have to be pushed in so that they seat in nicely.
thingiverse
free
1/32 Slotcar Guide for older Carrera-cars by Muratore73
...r older carrera-cars by muratore73
thingiverse
this is a guide fitting older carrera slotcars like ferrari 575 and corvette c5r.
grabcad
free
Slotcar Chassis
...slotcar chassis
grabcad
very stable slotcar chassis with bearings in front and rear.
using with 13d engine
thingiverse
free
Slotcar track guard rails 1/43 by daswollvieh
...slotcar track guard rails 1/43 by daswollvieh
thingiverse
guide rails for 1:43 slotcar track
grabcad
free
slotcar motor project
...slotcar motor project
grabcad
a slotcar motor
Slotcarbrad
thingiverse
free
Color Palette by SlotcarBrad
...or palette" that i copy and paste from to add color, which helps to find one part from all of the others in a large project.
thingiverse
free
JOE 2020 by SlotcarBrad
...logo. free to all, to copy and paste to your project. p.s. i wont be making anything for the "prez" anytime soon.
thingiverse
free
3D printed by SlotcarBrad
...ve, twist, or size to copy and paste it to other things. i'm printing one as we speak. i will make changes, if it turns ugly.
thingiverse
free
Anglewinder by SlotcarBrad
...it also takes the round axle bushings that most slotcars use. the bushings will have to be pushed in so that they seat in nicely.
thingiverse
free
Impeller Blade Scad by SlotcarBrad
...rking on a complete project for it, but i thought i would put it up as a very easy way to make impellers and ducted fan turbines.
thingiverse
free
Color Palette #2 by SlotcarBrad
...p last time. the openscad allows you to copy and paste colors to make it easy to tell one part from another in a large project.
thingiverse
free
Turbine Scad by SlotcarBrad
...ing at it, all you need to do to make it fit other projects is to change the user definable parameters until it meets your specs.
thingiverse
free
Large 12 Blade Turbine by SlotcarBrad
... wind power project. it assembles without tools with a long 1/4 20 bolt and nut. this uses the same fan blade as the 4 blade fan.
thingiverse
free
Stupid Fast Slotcar by SlotcarBrad
...and it works good, but i won't be going to my track until after strangeness is over, so i don't know how well it handles.
thingiverse
free
16D Slotcar by SlotcarBrad
... easy access to the inside, you can use tape to help hold the body, and even tape the wires, so they don't drag on the track.
Hardbody
humster3d
$75
3D model of Nissan Navara (NP300) Double Cab Hardbody Silver 2013
... (np300) double cab hardbody silver 2013 in various file formats. all our 3d models were created maximally close to the original.
thingiverse
free
Outlaw Hardbody Chassis by SlotcarBrad
...ing the perfect position. it takes a 16d motor and small wheels. it has 2 positions for the front axle, to give you more options.
thingiverse
free
Cherokee Hardbody Folding Mirrors by Strt_Fnst
... pins have an diameter of 3,9mm. so drill a 4mm hole and it should be fine.
i printed mine in black petg with 0,1mm layer height.
thingiverse
free
Cherokee Hardbody Frontmount Team Raffee by Strt_Fnst
...nstalled. i used some from snakepitrc.
this mount works great with this -> https://www.thingiverse.com/thing:4735574
greetings
thingiverse
free
Cherokee Hardbody Light Buckets for TRX4 Led Rocklights by Chrissel1591
...ke extra leds behind the lenses.
the rocklights work on 3v, so you have to use a stepdown modul, or a lightkit to make them work.
thingiverse
free
Hardbody Racing Slotcar by SlotcarBrad
...ld the motor tight without torqueing the screws too hard. the guide holder can be flipped to reach down if you have larger tires.
thingiverse
free
94 Nissan Hardbody Cup Holder/Coin Tray by hackawayjr
...on the front of the cup holder, stl with the front blank is included as well as a step file so you can add your own text or logo.
thingiverse
free
rc roof rack imperiaal roof bar 1:10
...thingiverse designed this roofrak for my 1:10 toyota tundra hardbody ...
thingiverse
free
D90/D110 Hard body Holder optional by allmay
...for suit mst cfx 1:10 frame kit with d90/d110 hardbody ...
Slotcar
3d_export
$5
holden opel insignia race car
...insignia race car 3dexport model made for reproduction of slotcar or rc model. the models are made and checked...
3d_export
$5
dodge charger hellcat 2016
...charger hellcat 2016 3dexport model made for reproduction of slotcar or rc model. the models are made and checked...
thingiverse
free
Slotcar Stand by SPIELFROSCH
...slotcar stand by spielfrosch
thingiverse
for 1:32 slotcars
thingiverse
free
Slotcar spacer by Clauridsen
...slotcar spacer by clauridsen
thingiverse
i made 3 different spacers for my slotcar. 10-15-20mm spacer
thingiverse
free
Unibody Slotcar by BKTRIE
...
this slotcar can be assembled without tools. the 15x6x3 neodyn magnet makes it easy to drive. it took 3h to print on my printer.
thingiverse
free
Leitplanke Barrier Slotcar by kopfschwimmer
...leitplanke barrier slotcar by kopfschwimmer
thingiverse
leitplanke 15cm lang für slotcar oder modellbauhobby
thingiverse
free
Slotcar Tyre Trueing by daswollvieh
...slotcar tyre trueing by daswollvieh
thingiverse
tyre trueing device without removing rear axle for slotcars
thingiverse
free
3D Logo as decoration for Slotcar tracks
...3d logo as decoration for slotcar tracks
thingiverse
this is a 3d decoration for a slotcar track
thingiverse
free
3D Logo as decoration for Slotcar tracks
...3d logo as decoration for slotcar tracks
thingiverse
this is a 3d sign as decoration for slotcar tracks.
thingiverse
free
3D Logo as decoration for Slotcar tracks
...3d logo as decoration for slotcar tracks
thingiverse
this is a 3d sign as decoration for slotcar tracks.
Chassis
design_connected
$16
Chassis
...chassis
designconnected
wilkhahn chassis chairs computer generated 3d model. designed by stefan diez.
3d_export
$10
truck chassis
...truck chassis
3dexport
truck chassis
3d_export
$5
Truck chassis
...truck chassis
3dexport
truck chassis
3d_export
$5
buggy chassi
...buggy chassi 3dexport chassis of a simple ride...
turbosquid
$35
Chassis
...odel chassis for download as 3ds, dxf, obj, c4d, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1413332)
design_connected
$16
Chassis Armchair
...chassis armchair
designconnected
baxter chassis armchair armchairs computer generated 3d model. designed by n/a.
turbosquid
$25
DRONE CHASSIS
...bosquid
royalty free 3d model drone chassis for download as on turbosquid: 3d models for games, architecture, videos. (1699724)
turbosquid
$79
Car Chassis
...quid
royalty free 3d model car chassis for download as blend on turbosquid: 3d models for games, architecture, videos. (1593376)
turbosquid
$50
Car Chassis
...osquid
royalty free 3d model car chassis for download as dwg on turbosquid: 3d models for games, architecture, videos. (1164087)
turbosquid
$75
Chassis 8x8
...free 3d model chassis 8x8 for download as ige, obj, and sldas on turbosquid: 3d models for games, architecture, videos. (1221250)