Thingiverse
Happ lock by wickedsun
by Thingiverse
Last crawled date: 2 years, 11 months ago
I built an arcade and bought a USB port that is shaped like a Happ button to go to the front of the cab.
Unfortunately, the connector is too short for the thickness of the board, so it couldn't be screwed in from the inside.
I designed this so that it fits a 30mm hole and it grabs on the button inside the panel instead of only on the outside.
I'm not 100% certain it works on a Happ button since I didn't test it but it fit on the USB, so I'm calling this good enough. Let me know if it doesn't actually work with a Happ button and I'll fix it.
Make sure you print External perimeters first, else the screw won't print right.
Unfortunately, the connector is too short for the thickness of the board, so it couldn't be screwed in from the inside.
I designed this so that it fits a 30mm hole and it grabs on the button inside the panel instead of only on the outside.
I'm not 100% certain it works on a Happ button since I didn't test it but it fit on the USB, so I'm calling this good enough. Let me know if it doesn't actually work with a Happ button and I'll fix it.
Make sure you print External perimeters first, else the screw won't print right.
Similar models
3dwarehouse
free
3' Happ Button Yellow
...3' happ button yellow
3dwarehouse
3' happ button yellow #button #happ #inch #three
thingiverse
free
Happ Lap Stick by brandonjmoore
...it.
this is compatible with happ-depth buttons and joystick. i think happ is the only way to go... seems i'm in the minority.
thingiverse
free
Larger buttons for new arcade amazon buttons by Nm855
...ake gloss.
i also made m3 screw feet with tpu at 20% infill
print the controller piece standing up so it won't need supports
thingiverse
free
Samsung Galaxy s5 Soft Case by Infernex87
...by messing with their chamfers. fits tight, so it probably won't work well with normal filaments.http://youtu.be/rk3zy_ypvfe
thingiverse
free
Happ Actuator by wickedsun
...
thingiverse
this is a happ controller actuator. one of the controllers i bought didn't have one, so i had to create my own.
thingiverse
free
1/2 screw by jonspencer
...'m just going to try this out at a few different sizes to see if it prints. drawing 7 is at 100% so i know it won't fit.
thingiverse
free
CR-10 USB Port Protector Guide by OneMake
...relocated the square port hole a little. after printing this, file it out a little to get the good snug fit with no slop at all.
thingiverse
free
Aerobed Handsfree Inflator by plwagner89
...;t have to hold down that small button to air up the mattress. i had to print the box part at 104% to make the screw fit easier.
thingiverse
free
Button by Xylitol
...;push' the button, i was bored of this sh*t so i designed a replacement.
printed in 0.1mm with abs and smoothed with acetone.
thingiverse
free
Spool to fit 608 bearing for "catfisher" by Cadfinger by PrOda
...t's pretty sturdy. the diameter is slightly larger so i'm not sure if it will still fit in an altoids tin, but it should.
Wickedsun
thingiverse
free
Happ Actuator by wickedsun
...
thingiverse
this is a happ controller actuator. one of the controllers i bought didn't have one, so i had to create my own.
thingiverse
free
WeMos Gas (MQ-5) Leak Sensor Case by wickedsun
...wemos gas (mq-5) leak sensor case by wickedsun
thingiverse
this is a gas leak sensor casing for natural gas, usb powered.
thingiverse
free
Hypercube Evolution Z Lead Screw Guide by wickedsun
...e not working out for me so i designed my own. based loosely on other models i found.
this fits 3030 extrusions and a 608 bering.
thingiverse
free
Beer holder for Arcade Cabinet by wickedsun
... used: https://www.amazon.com/gp/product/b00mkoibxm/
addon:
silicone coasters: https://www.aliexpress.com/item/4001328631439.html
thingiverse
free
Modular Diamond Hotend for Hypercube Evolution by wickedsun
...o i decided to remix them separately which makes it a lot easier to print.
requirements:
2xm3 screws, preferably socket.
2xm3 nut
thingiverse
free
New Spring Loaded Bowden Extruder Stepper Mount for 3030 Extrusion by wickedsun
...per to accommodate socket screws instead of button.
this is only the mount, the rest of the parts can be taken from the original.
thingiverse
free
Battery Powered ESP12F Door Sensor with Temperature Sensor Case by wickedsun
...t optimal setup to rescale properly effortlessly.
i will most likely also push my arduino code to github once i get to that part.
Happ
turbosquid
$29
Trussardi Casa Happ Sofa
...di casa happ sofa for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1580842)
turbosquid
$25
Trussardi Casa Happ Sofa
...sa happ sofa for download as max, max, max, fbx, obj, and 3ds on turbosquid: 3d models for games, architecture, videos. (1581365)
3dfindit
free
HAPP
...happ
3dfind.it
catalog: yuki giken
thingiverse
free
Happ P360 Gates
...happ p360 gates
thingiverse
hexagonal and square gate for the happ p360 arcade stick
3dfindit
free
HAPP-NF25
...happ-nf25
3dfind.it
catalog: yuki giken
thingiverse
free
Happ Actuator by wickedsun
...
thingiverse
this is a happ controller actuator. one of the controllers i bought didn't have one, so i had to create my own.
thingiverse
free
Joystick center guide (Happ style)
...joystick center guide (happ style)
thingiverse
simple guide to help center happ style joysticks into your control panel.
thingiverse
free
Happ Lap Stick by brandonjmoore
...it.
this is compatible with happ-depth buttons and joystick. i think happ is the only way to go... seems i'm in the minority.
thingiverse
free
Sanwa Joystick To Happ Mount Adapter by lkoloszyc
... make a sanwa joystick fit in il/happ mounting holes.
probably won't work very well and should be made of something sturdier.
Lock
turbosquid
$1
Lock
...ck
turbosquid
royalty free 3d model lock for download as fbx on turbosquid: 3d models for games, architecture, videos. (1286851)
3d_export
$5
lock handle
...lock handle
3dexport
lock handle
3d_export
$5
hinged lock
...hinged lock
3dexport
hinged lock
turbosquid
$1
Lock Box with combination lock
...ee 3d model lock box for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1215494)
turbosquid
$2
Lock
...
royalty free 3d model lock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452660)
turbosquid
$35
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.