Thingiverse
Handle For 1 1/4in Dowel by colinthompson
by Thingiverse
Last crawled date: 3 years, 1 month ago
This a door handle I make using the 3D printed parts provided and a stick that I found and kept because I thought I could use it for something like this. I first took and lined up the stick inside the printed pieces.
What you Need
4x 1 1/4in Wood Screws ( If attaching to 3/4in material)
4x 1 1/4in Wire Nails
1x 1 1/4in Dowel or Simular Sized Stick (any length will work, mine was about 8in)
I predrilled the holes for the 1 1/4in nails then hammered them into place. I repeated this step for both sides. I then lined this up on the door and drilled and countersunk the holes for it. I used the 1 1/14in screws to attach the handle to the door from the backside.
NOTE: The spacing between the 2 holes for the screws is spaced 1/2in apart.
What you Need
4x 1 1/4in Wood Screws ( If attaching to 3/4in material)
4x 1 1/4in Wire Nails
1x 1 1/4in Dowel or Simular Sized Stick (any length will work, mine was about 8in)
I predrilled the holes for the 1 1/4in nails then hammered them into place. I repeated this step for both sides. I then lined this up on the door and drilled and countersunk the holes for it. I used the 1 1/14in screws to attach the handle to the door from the backside.
NOTE: The spacing between the 2 holes for the screws is spaced 1/2in apart.
Similar models
thingiverse
free
Aeron Memory Foam Armrest Adapter (v2) by youresam
.... then, rotate it into position, and attach the back screw. tighten the back screw very tight, then the front screw mostly tight.
thingiverse
free
Please Shut The Gate Sign
... holes for screws/nails in case you need to line them up to a fence, etc.
i used thin nails to mount my please shut the gate sign
thingiverse
free
various sized stars with holes by dukeisi
...ut anything with a nail or screw through the hole.
i am printing these to nail or screw to a grove as at a private memorial site.
thingiverse
free
Drum Stick Prosthetic by mmarcus15
... through the holes made in this cuff.
place velcro through the arm_cuff to attach onto the person.
enjoy playing the drums :)
thingiverse
free
Door Handle with name by 3dsupport
...with name.
suitable for a door pin of square 8x8mm and a nail .
printed in abs, use glue to attached the parts.
info@3dsupport.nl
thingiverse
free
Scx10 Door Handle by mx_rider_250
...crew into it to fasten it down, a short m2 screw should work. the same door handle works for all 2 or 4 spots, it is symmetrical.
thingiverse
free
Zoetrope by Shoddiness
...zoetrope by shoddiness
thingiverse
simple zoetrope
i used a finishing nail in a dowel rod for the handle
thingiverse
free
Screw Handle by pyrolynx
...w's head straight. next, you need to cut the m4 thread into drilled hole and attach handle on hex.
fusion360 project applied.
thingiverse
free
Ultimaker 2 door magnet holder by knipknap
...ch the door handle such that the magnets line up. attaching the handle as shown in the youmagine door instructions will not work!
thingiverse
free
Handle with threaded holes by paulbernhardb
... it. use m5 screws to mount it somewhere.
i used it for the plexiglass door of my 3d printer enclosure.
prints without supports.
4In
thingiverse
free
4in x 4in x 1.25in project box by Mokin
...4in x 4in x 1.25in project box by mokin
thingiverse
simple 4 in x 4 in x 1.25 in box
thingiverse
free
4IN Hose Plug
...!
https://www.thingiverse.com/thing:3953776https://www.thingiverse.com/thing:3960822
design to print without support! :) by costa
thingiverse
free
4in to 6in pipe adapter by Matt19888
...4in to 6in pipe adapter by matt19888
thingiverse
pipe adapter. 4in to 6in.
thingiverse
free
Supra Logo (1/4in.) by Edgarova
...supra logo (1/4in.) by edgarova
thingiverse
simple 1/4in. thick supra logo.
thingiverse
free
4in Hose Adapter by wleigh
... join two 4in pvc hoses together (https://tinyurl.com/yb94d9ds). use hose clamps or cable ties to secure the hose to the adapter.
thingiverse
free
4in intake pipe with ford maf sensor placement
...ngiverse
4in. tube designed to fit 4in. sch. 40 pvc for diy intakes.
dimensions:
4in od
3.8in id
6.7in tall
for ford maf sensors
thingiverse
free
4in PVC pipe baffle by ZiggyShrimp
...imp
thingiverse
this is a simple half baffle for 4in pvc pipes used for maintaining a good water level for hydroponic gardening.
thingiverse
free
4in dust collector parts by PotatoGambit
...s by potatogambit
thingiverse
4in coupling and wall mount for dust right dust collector piping. wall mounts use the big zip ties
thingiverse
free
3/4in Conduit Topper by datalord
...
this was a topper i made for a friend that was using 3/4in electrical conduit as poles around his deck to hold string lighting.
thingiverse
free
4 Wire 1/4in Terminal Keeper by SUNNY_CHARLIE
...4 wire 1/4in terminal keeper by sunny_charlie
thingiverse
this is a holder/separator for 1/4in blade connection terminals.
Dowel
thingiverse
free
dowels by jhenriques
...dowels by jhenriques
thingiverse
bookshelf dowels
thingiverse
free
Dowel Holder for 1.25" dia doweling by amkissra
...m diameter doweling. i used this to create feet for a monitor riser. the holder screws to a flat board and the doweling slips in.
thingiverse
free
Star Dowel Foot
...star dowel foot
thingiverse
this dowel foot fits 3/8" dowels.
thingiverse
free
Dowel Jig for 18mm boards, 8mm dowels by bimcio
...cio
thingiverse
simple dowel jig, designed for 18mm boards and 8mm dowels.
assembly requires two ball bearings 608zz (8x22x7mm).
thingiverse
free
guider for dowels by Marekcheng
...guider for dowels by marekcheng
thingiverse
guider for dowels
thingiverse
free
3/8" Dowel
...3/8" dowel
thingiverse
3/8" dowel
thingiverse
free
Adjusted dowel by MysterE1801
...adjusted dowel by mystere1801
thingiverse
this is just a longer dowel for the base of the headphone stand
thingiverse
free
Dowel Jig by ioquatix
...is is a 3d part to assist with making dowel joints.
for latest parts and more details visit https://github.com/ioquatix/dowel-jig
thingiverse
free
Dowel Holder by brbn
...ave kids who play with the dowel if it's on the ground-level. i made these to hold the dowel up high and out of their reach.
thingiverse
free
Doweling Jig by Bobil
...res attached.
you need a m5 nut, a m5x50 bolt and a piece of pipe with inner diameter equals to dowel diameter and 1mm thickness.
Handle
thingiverse
free
handle
...handle
thingiverse
handle
thingiverse
free
handle
...handle
thingiverse
just a handle
thingiverse
free
handle
...handle
thingiverse
basic utencil handle
thingiverse
free
Handle lid handle cooked by ovidiun
...handle lid handle cooked by ovidiun
thingiverse
handle lid handle cooked , have inserted one nut m6
thingiverse
free
Handle, Halter, Goodman Handle by Ralf01
...handle, halter, goodman handle by ralf01
thingiverse
this is a handle for one torch for diving
thingiverse
free
Crank Handle
...crank handle
thingiverse
crank handle for any application that needs a handle for turn.
thingiverse
free
Handle, Halter, Goodman Handle by Ralf01
...handle, halter, goodman handle by ralf01
thingiverse
i designed this handle for my diving torch.
thingiverse
free
handle by Avtonomys
...handle by avtonomys
thingiverse
handle
thingiverse
free
Handle by Rustam
...handle by rustam
thingiverse
handle
thingiverse
free
Handle by TheBrunoSan
...handle by thebrunosan
thingiverse
a handle
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).