Thingiverse
Hair Band with Horn / Haarreifen mit Horn by h4rd4c
by Thingiverse
Last crawled date: 4 years, 3 months ago
Broad hairband with base-mount for a horn.
Horn printed in glow-in-the-dark pla.
Hairband printed with blue-transparent PETG.
The horn will pretty much click-on.
Nevertheless I've used an M3-Screw with approx. 15mm.
I've sealed the screw with hot glue, so no hair can be caught.
Behold the magic of the unicorn!
Tip:
Pre-Heat with a hairdryer in order to fit the hairband exactly & comfortably.
Thanks to Travism999 for the cool horn:https://www.thingiverse.com/thing:3958496
Horn printed in glow-in-the-dark pla.
Hairband printed with blue-transparent PETG.
The horn will pretty much click-on.
Nevertheless I've used an M3-Screw with approx. 15mm.
I've sealed the screw with hot glue, so no hair can be caught.
Behold the magic of the unicorn!
Tip:
Pre-Heat with a hairdryer in order to fit the hairband exactly & comfortably.
Thanks to Travism999 for the cool horn:https://www.thingiverse.com/thing:3958496