Thingiverse
Hacksaw blade knife/tool handle - Customizable by frol
by Thingiverse
Last crawled date: 4 years, 7 months ago
Handle and sheath for a knife or tool made from hacksaw blade.
If You need to customize the handle:
Measure your hacksaw blade part length
Subtract tool tip length (e.g. 20-25 mm is OK for a carving knife)
Decide on the handle length (150 mm is OK for most tools)
Open thing in Customizer and enter your measurements.
If You want to customize the sheath, You'll need to open sheath.scad file in OpenSCAD.
The handle should be printed with supports, the sheath - without support.
If You need to customize the handle:
Measure your hacksaw blade part length
Subtract tool tip length (e.g. 20-25 mm is OK for a carving knife)
Decide on the handle length (150 mm is OK for most tools)
Open thing in Customizer and enter your measurements.
If You want to customize the sheath, You'll need to open sheath.scad file in OpenSCAD.
The handle should be printed with supports, the sheath - without support.