Thingiverse
![Gyroscope / Accelerometer Mount by dgngdn](/previews/8666352.jpg)
Gyroscope / Accelerometer Mount by dgngdn
by Thingiverse
Last crawled date: 3 years, 1 month ago
A simple mounting part for MPU-6050 3-axis gyroscope/accelerometer. The breakout board is fixed to the mount via two M3 screws and held in place by two nuts. The end is flexible so as to allow the mount to clip on a cylindrical object with outside diameter of about 8mm.
Similar models
grabcad
free
![Motion - Gyroscope - Accelerometer GY-801](/t/5606855.jpg)
Motion - Gyroscope - Accelerometer GY-801
...motion - gyroscope - accelerometer gy-801
grabcad
there is nothing to say :)
grabcad
free
![GY-801](/t/5533496.jpg)
GY-801
...gy-801
grabcad
sensor module that integrates gyroscope, accelerometer, magnetometer and barometer.
thingiverse
free
![Support to calibrate accelerometer/gyroscope MPU6050 (GY-521) by Minguz](/t/8372312.jpg)
Support to calibrate accelerometer/gyroscope MPU6050 (GY-521) by Minguz
...yin to have the center of the sensor in the center of the support. at this point you can tilt it at 45/90 degree in the two axis.
grabcad
free
![Accelerometer LSM6DS3](/t/5577596.jpg)
Accelerometer LSM6DS3
...m6ds3 chip.it can be configured to different sensitivity levels of acceleration and different ranges of angular rate measurement.
grabcad
free
![Sparkfun 6DoF LSM6DSO (Qwiic)](/t/10870518.jpg)
Sparkfun 6DoF LSM6DSO (Qwiic)
...sparkfun 6dof lsm6dso (qwiic)
grabcad
lsm6dso inertial measurement unit featuring 3d accelerometer and 3d gyroscope
thingiverse
free
![Arduino Nano RC Transmitter by AlxUta](/t/9227333.jpg)
Arduino Nano RC Transmitter by AlxUta
...
two joysticks
two potentiometers
two toggle switches
six buttons ( two from the joysticks )
accelerometer and a gyroscope sensor
3dwarehouse
free
![Brass gyroscope in gimbal](/t/5817827.jpg)
Brass gyroscope in gimbal
...brass gyroscope in gimbal
3dwarehouse
a brass gyroscope with a two axis gimbal #gimbal #gyroscope
thingiverse
free
![Ambasat2 Space flight simulator by pe1mew](/t/8015589.jpg)
Ambasat2 Space flight simulator by pe1mew
...nted @ambasat2 sprite satellite space-flight-simulator for software testing of the gyroscope, accelerometer, magnetometer sensor.
thingiverse
free
![D1M BLOCK - GY521 (custom Gyroscope/Accelerometer) block by IOT123](/t/8591278.jpg)
D1M BLOCK - GY521 (custom Gyroscope/Accelerometer) block by IOT123
...ring, and 2 off 8 pin 10mm long needle female pin header strip are required for this build.
instructions
code examples
d1m blocks
thingiverse
free
![Voron v0 ADXL345 Mount by VBXNwi3mk3s](/t/8499458.jpg)
Voron v0 ADXL345 Mount by VBXNwi3mk3s
...s://ja.aliexpress.com/item/32831977529.html)
compression fixation : three m2x8mm screws.
accelerometer fixed : two m2x6mm screws
Dgngdn
thingiverse
free
![Infrared Sensor Housing by dgngdn](/t/8654260.jpg)
Infrared Sensor Housing by dgngdn
...he following instructions for assembly and software end: http://www.instructables.com/id/simple-ir-proximity-sensor-with-arduino/
thingiverse
free
![Spice Rack/ Shelf Leg by dgngdn](/t/8649857.jpg)
Spice Rack/ Shelf Leg by dgngdn
...spices underneath and on top the shelf. it's functional, doesn't look out of place and suitable for small printer sizes!
thingiverse
free
![iPad mini mount - two piece by dgngdn](/t/8666552.jpg)
iPad mini mount - two piece by dgngdn
...ece design also allows it to be used for different ipad/tablet sizes based on how far apart you mount the two pieces on the wall.
thingiverse
free
![Custom Two Part Deck Box (for small printers) by dgngdn](/t/8637259.jpg)
Custom Two Part Deck Box (for small printers) by dgngdn
...tically pleasing enough that i do not plan a redesign atm.
pictured, printed in wood-pla composite, sanded and stained to finish.
thingiverse
free
![Stepper Motor z-axis Actuator by dgngdn](/t/8666459.jpg)
Stepper Motor z-axis Actuator by dgngdn
...he fumes.). the base and the stabilizer are attached to the wooden railings via hot glue.
in action: https://youtu.be/gc4lbw_uone
Accelerometer
3d_export
$35
![chevrolet camaro](/t/11459539.jpg)
chevrolet camaro
...other 3d software. has car interior details; seat, pheromone, accelerometer a short video of this project has been uploaded...
3dfindit
free
![Embedded Accelerometers](/t/12729483.jpg)
Embedded Accelerometers
...embedded accelerometers
3dfind.it
catalog: te connectivity
thingiverse
free
![Accelerometer Case by lakephall](/t/8569007.jpg)
Accelerometer Case by lakephall
...celerometer sensor face-down. the tabs on the side are meant to allow for half-inch hook and loop straps to hold down the sensor.
thingiverse
free
![WIMUv3 Accelerometer Calibration Fixture by M_G](/t/9066921.jpg)
WIMUv3 Accelerometer Calibration Fixture by M_G
... be placed in a known position on the test apparatus to aid in the repeatable calibration of said accelerometer containing device
thingiverse
free
![U-Bracket for GDX Accelerometer by vernier](/t/8556794.jpg)
U-Bracket for GDX Accelerometer by vernier
...ernier
thingiverse
this bracket is used with the gdx accelerometer.
this bracket is designed to be used with a 1/4-20 screw/nut.
thingiverse
free
![3D printed MEMS accelerometer by adamweld](/t/8709620.jpg)
3D printed MEMS accelerometer by adamweld
... the device was envisioned to be simple and easy to understand while using the same operating principles as a mems accelerometer.
thingiverse
free
![Tube Plate for GDX accelerometer by vernier](/t/8556787.jpg)
Tube Plate for GDX accelerometer by vernier
...be plate is used to mount the gdx accelerometer.
this plate (and the accompanying bracket) are designed around 1/4-20 fasteners.
thingiverse
free
![Box for gyro accelerometer board by robsteele](/t/9015184.jpg)
Box for gyro accelerometer board by robsteele
...by andy mark. it will require tapping 4 holes for #4 screws. the top parts has a hold for a 10-24 screw for holding the box down.
thingiverse
free
![Donkeycar GY-521 accelerometer and gyro support](/t/4902159.jpg)
Donkeycar GY-521 accelerometer and gyro support
...his one:https://fr.aliexpress.com/item/1028067742.html
probably not the best. need a super quiet (stable with no spike) power in.
Gyroscope
turbosquid
$1
![Gyroscope](/t/13315443.jpg)
Gyroscope
...ree 3d model gyroscope for download as max, fbx, 3ds, and obj on turbosquid: 3d models for games, architecture, videos. (1581593)
turbosquid
$1
![Gyroscope](/t/13239752.jpg)
Gyroscope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
![Gyroscope 3D Model](/t/47837.jpg)
Gyroscope 3D Model
...gyroscope 3d model
3dexport
gyroscope toy model 3dprinting
gyroscope 3d model pisarevg 50094 3dexport
3d_export
$5
![Gyroscope 3D Model](/t/126227.jpg)
Gyroscope 3D Model
...gyroscope 3d model
3dexport
gyroscope 3d model pisarevg 78928 3dexport
turbosquid
$28
![Brass Gyroscope](/t/13512867.jpg)
Brass Gyroscope
...ee 3d model brass gyroscope for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1629790)
3ddd
free
![Foucault's Iron Orb](/t/122430.jpg)
Foucault's Iron Orb
...orb restoration hardware nineteenth century experimental physicist léon foucault's gyroscope inspired our openwork globe. its double-gimbal frame is built...
sketchfab
$5
![Gyroscope](/t/8319310.jpg)
Gyroscope
...gyroscope
sketchfab
gyroscope exported from unity. - gyroscope - buy royalty free 3d model by dbr3d
thingiverse
free
![Gyroscope by abapemilo](/t/8681451.jpg)
Gyroscope by abapemilo
...gyroscope by abapemilo
thingiverse
20170715 gyroscope
thingiverse
free
![Gyroscope by CBUEngineering](/t/8904484.jpg)
Gyroscope by CBUEngineering
...gyroscope by cbuengineering
thingiverse
gyroscope with weighted middle section
thingiverse
free
![Gyroscope by ntdwyer](/t/8726927.jpg)
Gyroscope by ntdwyer
...gyroscope by ntdwyer
thingiverse
first edition of my pull-string gyroscope design.
Mount
3d_export
free
![mounting bracket](/t/11930644.jpg)
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
![MOUNTING](/t/13297806.jpg)
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mounts](/t/13301538.jpg)
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mount Fuji](/t/13283919.jpg)
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
![Headphone mount LR](/t/13049709.jpg)
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
![Mount rainier](/t/13389641.jpg)
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
![pipe mounting](/t/13242068.jpg)
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
![Mounting Tires](/t/13457386.jpg)
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
![Magnetic GoPro Mount](/t/11385909.jpg)
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
![Stone Mount](/t/13279026.jpg)
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)