Thingiverse
gutter cleaner by Koenejet
by Thingiverse
Last crawled date: 3 years, 1 month ago
Please read before printing: This is not a simple 'print and use' project. This needs extra work after printed. You will need 80 grit sand paper to sand the male end for a good fit into the nozzle. I also had to cover everything inside and out with extra thin super glue to plug the pours to keep it from leaking. I also had to make a seal to go inside the nozzle, so it wouldn't leak between the main part and nozzle. Again, just a heads up on the work involved.
I needed an easy way to clean my gutters from the ground. So I made this. This mounts onto a telescopic tree branch trimmer, and the shape allows you to scoop stuff out of the gutters. While the water jet washes smaller stuff out and down the down spout. I used 5 wall thickness and 5 layers for bottoms and tops, with a 40% infill. That may have been overkill, but I didn't want it to break, or leak. Well, it leaks. Like a sieve. It still works though. But my plan is to coat the whole thing with epoxy to plug the pours. Also, it broke. where the water hose screws on. My fault, not the print. I was a little rough removing the infill. I bonded it back together with solvent, and then wrapped carbon fiber around it. I also installed the endcap with solvent. Super glue might work, but I recommend Plastruct Bondene. It bonds styrene, ABS, and PLA (which is what I print with).
Also, the end pipe can be removed and turned around, so this will clean the right and left side gutter down spouts. At the moment, mine plugs in pretty secure, but if it ever gets loose, I will drill a hole for a screw. I also need to cut a rubber seal to keep it from leaking as well. The ends will need some sanding for a nice fit.
This does need support to print, and just a fair warning, the support is a pain in the rear to remove. This is one project where I really wish I had duel extruders for a water soluble support material.
I got what I need out of it. If anyone wants to redesign this to make it better, please do. It is definitely not perfect, but it works for me. Also, I got the threads from thingiverse, and I really apologize, I don't remember who I used them from (they were meant to be used, so I didn't 'steel' them). I did modify them a bit, but if you recognize it as yours, let me know.
Hope this is helpful to someone,
I needed an easy way to clean my gutters from the ground. So I made this. This mounts onto a telescopic tree branch trimmer, and the shape allows you to scoop stuff out of the gutters. While the water jet washes smaller stuff out and down the down spout. I used 5 wall thickness and 5 layers for bottoms and tops, with a 40% infill. That may have been overkill, but I didn't want it to break, or leak. Well, it leaks. Like a sieve. It still works though. But my plan is to coat the whole thing with epoxy to plug the pours. Also, it broke. where the water hose screws on. My fault, not the print. I was a little rough removing the infill. I bonded it back together with solvent, and then wrapped carbon fiber around it. I also installed the endcap with solvent. Super glue might work, but I recommend Plastruct Bondene. It bonds styrene, ABS, and PLA (which is what I print with).
Also, the end pipe can be removed and turned around, so this will clean the right and left side gutter down spouts. At the moment, mine plugs in pretty secure, but if it ever gets loose, I will drill a hole for a screw. I also need to cut a rubber seal to keep it from leaking as well. The ends will need some sanding for a nice fit.
This does need support to print, and just a fair warning, the support is a pain in the rear to remove. This is one project where I really wish I had duel extruders for a water soluble support material.
I got what I need out of it. If anyone wants to redesign this to make it better, please do. It is definitely not perfect, but it works for me. Also, I got the threads from thingiverse, and I really apologize, I don't remember who I used them from (they were meant to be used, so I didn't 'steel' them). I did modify them a bit, but if you recognize it as yours, let me know.
Hope this is helpful to someone,
Similar models
thingiverse
free
Watering Can Nozzle by Caipi
... nozzle can be printed without support. with support it might be a nicer print, however i never tested support with tpu material.
thingiverse
free
Water Feature Spouted Pot by MagizoologistB
...had broken, as i couldn't find exisitng models with similar spouts. i'll probably end up redesigning them with an...
thingiverse
free
Bunny Water Bottle Holder by ttrostel
...tal spout but of course the bottle didn't fit any more so i whipped up this replacement holder for the cage.
i hope it helps!
thingiverse
free
Outlet Cover Box by Skyla157
...i had one flat angled plug.
printed in petg with a .6mm nozzle on an ender 3 max. printed in about 5 hours. no supports needed.
thingiverse
free
Printed Solid Enclosure Plugs by clubmedic
...erfectly.
print these upside down and you won't need any supports.
i'm also adding other plugs for other unused openings.
thingiverse
free
Kong Pin by K9ES
....
i have printed this in both pla and petg. i have not thrown them in the dishwasher so i don't know if they would survive.
thingiverse
free
Replacement watering can spout / water diffuser by jamesarm97
...t doesn't screw on, was designed to just press onto the old threads so it pretty specific. fits a spout with a 20mm diameter.
thingiverse
free
Overwatch Small Healthpack by Falling_Rainbows
...one in game, created a health pack that looks similar but isn't completely accurate to the game in autodesk...
thingiverse
free
Yet Another Watering Spout for Water Bottle by chickan
...ing:38224 (which my cats love) and put it on the spout from thing:9535. works much better, threaded in the first time, no leaks.
thingiverse
free
Water Bottle Seal by whererainbowsend
...water bottle seal by whererainbowsend
thingiverse
to seal leaking water bottles, so that water leaks will be minimized.
Koenejet
thingiverse
free
bina-view project by Koenejet
...rt of it.
you'll just have to look at all the parts, watch all the you tube videos, and try to figure out my mess. good luck.
thingiverse
free
Lego Resistance Bomber bomb, Lego ball by Koenejet
...ith 1 bottom, 2 perimeters, and 2 tops with a 25% infill. they fit and function perfectly. obviously print two and glue together.
thingiverse
free
bina-view project by Koenejet
... like. there is plenty of room for improvement. this project was really just a 'to see if i can do it' kind of a project.
thingiverse
free
EZM328 tester box by Koenejet
...nt. for screw, i just used whatever scavenged screws i had.
any normal print settings should work, but the top will need support.
thingiverse
free
caterpillar scraper, earth mover by Koenejet
...ake a pic before i gave it too him, so i will try to have my dad take and send me a photo of it and i will post that when i can.
thingiverse
free
lost wax casting flask sprue base by Koenejet
...g flask, and the flange is less than 15mm from the end, you should scale this height wise to fit. hopefully this all makes sense.
thingiverse
free
optical endstop mount and adjustable target by Koenejet
...i just stuck the end stop on it with double sided sticky pad. i may change it later, but it works fine.
hope this helps someone,
thingiverse
free
modified wheel with flex tire for 1/10 rc by Koenejet
...re perimeters and infill, the longer the print time, but stiffer the tire.
hope this is use full for someone.
thanks for looking,
thingiverse
free
1/48 scale Dassault Falcon 2000EX EASy by Koenejet
...nting up), and the fan needs flipped over. but i think most of you could have figured that out anyway. oh well, have fun with it.
Gutter
turbosquid
$4
street gutter
...id
royalty free 3d model street gutter for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1666921)
turbosquid
$13
Gutter Stone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Gutter Walking Crutch
...g crutch for download as blend, blend, 3ds, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1590222)
3d_export
$40
Downspout Gutter 00 3D Model
...ain drainage tube tubing pvc metal exterior outdoor roof wall 3d max vray
downspout gutter 00 3d model pharametriq 10162 3dexport
turbosquid
$11
Old Black Gutter System PBR
...lack gutter system pbr for download as 3ds, max, obj, and dae on turbosquid: 3d models for games, architecture, videos. (1347824)
turbosquid
$11
New Aluminium Gutter System PBR
...gutter system pbr for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1347834)
turbosquid
$11
Old brown Gutter System PBR
...gutter system pbr for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1347826)
3ddd
$1
Крыша
...черепица complete roof: - tiles (end, middle, start) - gutter - bottom...
3d_export
$20
Rainwater butt 3D Model
...butt 3d model 3dexport water butt garden gardening rainwater gutterng rainwater butt 3d model pixelblock 31168...
3d_ocean
$20
House
...house 3docean building chimney conservatory door garage gutter home house roof window wood model of a house...
Cleaner
archibase_planet
free
Cleaner
...cleaner
archibase planet
crane lift
fased cleaner - 3d model for interior 3d visualization.
3d_export
$12
vacuum cleaner
...vacuum cleaner
3dexport
vacuum cleaner fo houses
3ddd
$1
Vacuum Cleaner
...vacuum cleaner
3ddd
пылесос
vacuum cleaner + obj + textures
turbosquid
$4
Cleaner
...r 3d model for download as max, obj, c4d, fbx, dwg, and blend on turbosquid: 3d models for games, architecture, videos. (1514067)
archibase_planet
free
Vacuum cleaner
...cuum cleaner vacuum hoover exhauster
vacuum cleaner stefano galli n250213 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Cleaner 3D Model
...archive3d
cleaner bathroom ware
cleaner - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Cleaner 3D Model
...e3d
brush cleaner sanitary ware
cleaner - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Cleaner 3D Model
...h cleaner sanitary ware
cleaner n210608 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$17
Window Cleaner Platform
...tform rooftop window window cleaner platform
model of a window cleaner platform made in cinema 4d. files inlcuded: .c4d .obj .3ds
archive3d
free
Cleaner 3D Model
...ment
vacuum cleaner samsung vcc_sc 9560 - 3d model (*.gsm+*.3ds) for interior 3d visualization.