Thingiverse
Gutter Clamp - INVISIBLE SCREWS by 3dsupport
by Thingiverse
Last crawled date: 4 years, 2 months ago
For mounting a gutter directly to a (brick) wall, I designed a bracket which can be 3Dprinted. The main reason for designing and printing this bracket myself, was to create a bracket with invisible screws.
I found the solution in a two piece bracket. Part 1 must be mounted to the wall with two screws and part 2 fits by easily twisting it 90° on part 1. The screws disappear between the parts. See pictures.
For the best result you can put in some paper between both parts (invisible) to minimize the space between both parts. You can also use some glue, but this makes demounting more difficult
It is suitable for a gutter with a radius of 50mm. Printed it in PLA, Printing time around 4 hours.
I found the solution in a two piece bracket. Part 1 must be mounted to the wall with two screws and part 2 fits by easily twisting it 90° on part 1. The screws disappear between the parts. See pictures.
For the best result you can put in some paper between both parts (invisible) to minimize the space between both parts. You can also use some glue, but this makes demounting more difficult
It is suitable for a gutter with a radius of 50mm. Printed it in PLA, Printing time around 4 hours.