Thingiverse
Guitar Wall Mount - Fender Squier Telecaster by ismaan
by Thingiverse
Last crawled date: 4 years, 11 months ago
I designed a wall mount for a Fender Squier Telecaster Affinity guitar.
The body brackets should be firmly mounted to the wall, I used 2 inch screws. The hole plug hides the screw holes in the body brackets. The two body brackets should be aligned with all the screw holes horizontal.
The neck bracket stops the guitar falling forward and also stops the head from backing against the wall.
I printed with 2mm walls and 20% infill and it feels very sturdy. No supports or rafts are needed.
The body brackets should be firmly mounted to the wall, I used 2 inch screws. The hole plug hides the screw holes in the body brackets. The two body brackets should be aligned with all the screw holes horizontal.
The neck bracket stops the guitar falling forward and also stops the head from backing against the wall.
I printed with 2mm walls and 20% infill and it feels very sturdy. No supports or rafts are needed.