Thingiverse
GSO WIFI DSC V2 (Work in progress)
by Thingiverse
Last crawled date: 5 years, 4 months ago
Wifi DSC for GSO dobsonian telescope.
AS5600 sensor and ESP8266 board.
Use Alt_Adj and Az_Adj for initial assembly. Remove after.
Images show the first version.
Very important:
To minimize nonlinearity: Sensor and magned axies must coincidents. Use axis tool.
You can test it with another sensor like AS5040 or AS5045.
V2: 30/01/2020
Cylinder Magnet (6mm diameter and 2.5mm high) improves output.
Axis adjust tool is added.
V1: 02/12/2019
Three magnets on the shaft and the nonlinearity is still there.
Waitint to receiver a suitable magnet to continue with the development.
Cloud:https://drive.google.com/open?id=1FL6uppul-mV6ojc7r33ZgEd5nC2Wwi8s
https://www.youtube.com/watch?v=TdtAC_TyRoQ
AS5600 sensor and ESP8266 board.
Use Alt_Adj and Az_Adj for initial assembly. Remove after.
Images show the first version.
Very important:
To minimize nonlinearity: Sensor and magned axies must coincidents. Use axis tool.
You can test it with another sensor like AS5040 or AS5045.
V2: 30/01/2020
Cylinder Magnet (6mm diameter and 2.5mm high) improves output.
Axis adjust tool is added.
V1: 02/12/2019
Three magnets on the shaft and the nonlinearity is still there.
Waitint to receiver a suitable magnet to continue with the development.
Cloud:https://drive.google.com/open?id=1FL6uppul-mV6ojc7r33ZgEd5nC2Wwi8s
https://www.youtube.com/watch?v=TdtAC_TyRoQ