Thingiverse
"GREEN BULLET" harmonica microphone by cain666
by Thingiverse
Last crawled date: 3 years ago
my version of the classic blues harp mic the "green bullet" (although mine is printed in white :P) it should only cost about $15-$20 to make the BOM (excluding things like screws, i didnt need any in the one i printed due to the front being nice and tight)
I made a BNC version just because i think the socket is less likely to get noise or pop out or get loose.. but i have made a 1/4" jack version although i havent printed it to see if it all fits.. but it should.
3mm self tapping screws should work to hold the flange in and the front can be mounted with 3X2.5mm self tapping counter sunk screws if yours prints loose
the STL files have been fixed to recess the volume pot a bit deeper into the mic so the knob sits more flush with the body
the mic:https://www.ebay.com.au/itm/Lovoski-Durable-Dynamic-Microphone-Cartridge-Core-Insert-Mic-For-Broken/183161814336?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Volume POT:https://www.ebay.com.au/itm/4-pcs-10k-Ohm-Audio-Taper-Log-Pot-A10K-Solder-Lugs-Split-Shaft-Potentiometer-NEW/350632295639?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
the Knob:https://www.ebay.com.au/itm/5Pcs-Aluminum-Potentiometer-Knob-6mm-Cap-Inner-Volume-Control-Rotary-Switch/142387618833?ssPageName=STRK%3AMEBIDX%3AIT&var=441403229858&_trksid=p2057872.m2749.l2649
if your making the BNC version:https://www.ebay.com.au/itm/1X-Connector-BNC-Female-Jack-4-Hole-18-5mm-Flange-Solder-Panel-Mount-Straight-B2/322939614292?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
the standard 1/4" jack version:https://www.ebay.com.au/itm/Hot-New-1-4-Mono-Female-Input-Jack-Socket-Plug-Fr-Electric-Guitar-Bass/141646886398?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
to make the BNC to 1/4" lead i changed the plug on one end of this cable:https://www.ebay.com.au/itm/Nylon-Braid-6-35mm-1-4-TRS-Male-Cable-Patch-Connector-for-Guitar-Bass-3m/312026257988?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
to this plug:https://www.ebay.com.au/itm/1pce-Connector-BNC-male-plug-jacketed-solder-RG58-RG142-LMR195-RG400-RF-COAXIAL/222098559169?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I made a BNC version just because i think the socket is less likely to get noise or pop out or get loose.. but i have made a 1/4" jack version although i havent printed it to see if it all fits.. but it should.
3mm self tapping screws should work to hold the flange in and the front can be mounted with 3X2.5mm self tapping counter sunk screws if yours prints loose
the STL files have been fixed to recess the volume pot a bit deeper into the mic so the knob sits more flush with the body
the mic:https://www.ebay.com.au/itm/Lovoski-Durable-Dynamic-Microphone-Cartridge-Core-Insert-Mic-For-Broken/183161814336?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Volume POT:https://www.ebay.com.au/itm/4-pcs-10k-Ohm-Audio-Taper-Log-Pot-A10K-Solder-Lugs-Split-Shaft-Potentiometer-NEW/350632295639?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
the Knob:https://www.ebay.com.au/itm/5Pcs-Aluminum-Potentiometer-Knob-6mm-Cap-Inner-Volume-Control-Rotary-Switch/142387618833?ssPageName=STRK%3AMEBIDX%3AIT&var=441403229858&_trksid=p2057872.m2749.l2649
if your making the BNC version:https://www.ebay.com.au/itm/1X-Connector-BNC-Female-Jack-4-Hole-18-5mm-Flange-Solder-Panel-Mount-Straight-B2/322939614292?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
the standard 1/4" jack version:https://www.ebay.com.au/itm/Hot-New-1-4-Mono-Female-Input-Jack-Socket-Plug-Fr-Electric-Guitar-Bass/141646886398?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
to make the BNC to 1/4" lead i changed the plug on one end of this cable:https://www.ebay.com.au/itm/Nylon-Braid-6-35mm-1-4-TRS-Male-Cable-Patch-Connector-for-Guitar-Bass-3m/312026257988?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
to this plug:https://www.ebay.com.au/itm/1pce-Connector-BNC-male-plug-jacketed-solder-RG58-RG142-LMR195-RG400-RF-COAXIAL/222098559169?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Similar models
thingiverse
free
DIY 1s Charger / 1s Lader by zaphi
...strk%3amebidx%3ait
power suply:http://www.ebay.de/itm/221961044643?_trksid=p2057872.m2749.l2649&sspagename=strk%3amebidx%3ait
thingiverse
free
360w psu cover by kimmerkesdal
...0w psu - http://www.ebay.com/itm/262626173745?_trksid=p2057872.m2749.l2649&var=561523999305&sspagename=strk%3amebidx%3ait
thingiverse
free
Kossel Cooling by SimonFrick
...o09_s01?ie=utf8&psc=1
fan:
http://www.ebay.de/itm/111317241608?_trksid=p2057872.m2749.l2649&sspagename=strk%3amebidx%3ait
thingiverse
free
Electric Screwdriver by Kattstryparen
...ff-on-rocker-switch-momentary-rocker-switch-wl/232537776527?sspagename=strk%3amebidx%3ait&_trksid=p2057872.m2749.l2649 switch
thingiverse
free
Filter for 3d printer by pochetto
...plice-estremamente-silenzioso/dp/b002ktvftehttps://www.youtube.com/watch?v=cgh0vhmcvlohttps://www.youtube.com/watch?v=ie_0_-arzee
thingiverse
free
SSR PS_ON COVER by thomasgobert
...mp;var=571595784259&sspagename=strk%3amebidx%3ait
thanks to 3dms : https://www.thingiverse.com/thing:2193481 for the upgrade.
thingiverse
free
powerbank by GottderDrachen
.../www.dx.com/de/p/universal-replacement-3-7v-4800mah-li-polymer-battery-for-7-10-tablet-pc-sliver-05-x-80-x-95-321496#.vgldrvkpnt4
thingiverse
free
Coin capsule tube 30mm and 33mm by jalla2000
...sspagename=strk%3amebidx%3ait
http://www.ebay.com/itm/182199967698?_trksid=p2060353.m2749.l2649&sspagename=strk%3amebidx%3ait
thingiverse
free
Holder for power switch with integrated strain relief by wbggre
...er on / off
i used this switch:http://www.ebay.de/itm/141418060372?_trksid=p2057872.m2749.l2649&sspagename=strk%3amebidx%3ait
thingiverse
free
Earphone pad modification / Modification coussinet écouteur by 3D_CC_design
...x%3ait
padhttp://www.ebay.fr/itm/281669764696?_trksid=p2060353.m2749.l2649&var=580675186733&sspagename=strk%3amebidx%3ait
Cain666
thingiverse
free
OpenRC reinforced C-Hub by cain666
...verse
i found that the shafting tore out from the bottom of the c-hub even when printed in nylon, so i added 0.5mm to the sides.
thingiverse
free
Turnigy Micro-Quad landing gear by cain666
...turnigy micro-quad landing gear by cain666
thingiverse
i didnt like the tippy landing gear on the micro quad so i made my own.
thingiverse
free
OpenRC Rim Smallest Dia by cain666
...rim but it was to dished and the wishbone hit it, these are a bigger dia than the originals but the tyre stretches over it nicely
thingiverse
free
Aquarium air manifold mount by cain666
... some caps.. they are made to be mounted with normal plasterboard screws, and can be chained together with the double ended mount
thingiverse
free
Rancilio Rocky easy clean spout by cain666
...came up with, so far it seems to work quite well, you will need to use the old screws and rubber washers from the original spout.
thingiverse
free
La Pavoni portafilter declumping ring by cain666
...nd my easy clean spout http://www.thingiverse.com/thing:101392 )
not only that it works as a portafilter hanger on the grinder
thingiverse
free
MyGeiger 2 Case by cain666
...o led in the bezel)
the 3 extra holes in the bottom of the lid are for a handle that i havent designed or decided if i want yet..
thingiverse
free
Lathe tool holders for Sieg C6 lathe by cain666
...g nuts to screw it to the chip guard at the back of the lathe
i made this as the other one on thingiverse wont fit the c6 tools
thingiverse
free
La Pavoni boiler nut removal tool by cain666
... get though the hole
you might want to print lots of perimeters or nearly 100% infill
still way cheaper than $20 to rent the tool
thingiverse
free
Extruder support for lawsy's mk4 solidoole set, with accessory clip retained by cain666
...xtruder in place.
it should be ready to print but you might need to flip it on the bed and print with support, for the overhang
Harmonica
3d_ocean
$7
Harmonica
...nica with 6934 polygons. it can be subdivided as needed for best results/performance. - preview images rendered with mental ray -
turbosquid
$49
Harmonica
...
royalty free 3d model harmonica for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1689333)
turbosquid
$25
Harmonica
...y free 3d model harmonica for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1704762)
turbosquid
$42
harmonica
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Harmonica
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
harmonica
...fbx and .obj formats and a blender file with materials.<br>there are high and low poly versions of the model also included.
3d_export
$5
Harmonica 3D Model
...t
golden butterfly harmonica model 3d polygon mesh instrument musical music dance saloon
harmonica 3d model zaerer 21651 3dexport
3d_export
$15
Harmonica 3D Model
...harmonica music harp corona mentalray 3d model jazz instruments blues song organ tremolo
harmonica 3d model gizart 93112 3dexport
3d_export
$12
Harmonica 3D Model
...nstrument american folk jazz rock and roll diatonic chromatic tremolo octave orchestral
harmonica 3d model firdz3d 75410 3dexport
3d_export
$12
harmonica
...ica
3dexport
texture - 4k png, tga. pbr metal/roughness workflow. tris - 7424. render - marmoset. format model - 3dmax, obj, fbx
Microphone
3ddd
$1
microphone
...microphone
3ddd
microphone , микрофон
microphone
3d_ocean
$7
Microphone
...microphone
3docean
mic microphone mike
microphone
3d_ocean
$4
Microphone
...microphone
3docean
mic microphone mike
microphone with spherical grill
archibase_planet
free
Microphone
...hone conference microphone
digital conference selector microphone n170912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$7
microphone
...microphone
3dexport
black microphone
3d_export
$5
microphone
...microphone
3dexport
black modern microphone for streaming
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n260809 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
equipment microphone
microphone n230410 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n250608 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n160309 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Bullet
3d_export
$5
Bullet
...bullet
3dexport
bullet
3d_export
free
bullet
...bullet
3dexport
bullet in the context of
3d_export
$5
bullet
...bullet
3dexport
ready 3d model of a bullet.
3d_ocean
$1
Bullet
...bullet
3docean
bullet copper_material fully in blender project multi-materials weapons
bullet in 3d with multiple materials
3d_export
$5
bullet
...bullet
3dexport
bullet, created in blender there are 2 versions with and without texture.
3d_ocean
$7
Wanted Bullet
...wanted bullet
3docean
bullet wanted
wanted bullet
3d_ocean
$3
Brass Bullets
...brass bullets
3docean
brass bullet bullets gun guns rifle rifles
low-poly bullets
3d_export
$15
bullet box
...bullet box
3dexport
bullet box for 50 bullets with hinges type a
3d_export
$15
bullet box
...bullet box
3dexport
bullet box for 50 bullets with hinges tybe b
turbosquid
$1
bullet
...bullet
turbosquid
free 3d model bullet for download as c4d on turbosquid: 3d models for games, architecture, videos. (1191844)
Green
3d_export
$65
green hills and green water
...green hills and green water
3dexport
simple rendering of the scene file
turbosquid
$10
Green
...n
turbosquid
royalty free 3d model green for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1172179)
3d_export
$30
green chameleon
...green chameleon
3dexport
green chameleon
3d_export
$29
green mountain
...green mountain
3dexport
green mountain
3d_export
$20
green frog
...green frog
3dexport
green frog
3d_export
$5
Green Grass
...green grass
3dexport
green grass
3ddd
$1
Green curtain
...green curtain
3ddd
green curtain
3d_export
$10
greens
...greens
3dexport
3d_export
$10
greens
...greens
3dexport
turbosquid
$49
Greens
...oyalty free 3d model greens for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1521497)