Thingiverse
![Gotek Floppy Emulator Carriage for Atari ST (1024STF) by PlanC](/previews/8658241.jpg)
Gotek Floppy Emulator Carriage for Atari ST (1024STF) by PlanC
by Thingiverse
Last crawled date: 3 years, 1 month ago
Nobody appeared to have uploaded one of these for the Atari ST so I did :) Uses the existing floppy drive bolts. The Gotek (out of it's case) can be secured to the carriage with 2 short M3 bolts. I have lined the LCD and buttons up so that they are visible and accessible without any modifications or damage to the Atari ST case. This requires slight lengthening of the supplied wires.You may need to lengthen the floppy drive power and ribbon cables. Please check wiring and don't follow colours on my pic as I used red and black the wrong way around :OBe aware that the floppy ribbon cable on my ST was soldered directly onto the motherboard. I replaced it with a longer one and new pin headers but it may be easier to use back-to-back pin headers to extend the existing cable. Also, you may want to move the LED hole as I had to drill another. This is easily done in Sketchup. File attached. Good Luck All.
Similar models
thingiverse
free
![Gotek mount for Atari ST small button floppy drive by MrAtari1040ST](/t/10251374.jpg)
Gotek mount for Atari ST small button floppy drive by MrAtari1040ST
...nd placed it there, using a wire)
one capacitor didn't fit in the original design, so i made some room for it in the chassis.
thingiverse
free
![Atari ST DIN14 floppy disk drive connector by stinguc](/t/8369141.jpg)
Atari ST DIN14 floppy disk drive connector by stinguc
... need at least 3 donor din 5.
also, you may find easier to insert the pins if you will use an solder iron heated to 200 degree c.
thingiverse
free
![Atari ST HxC USB floppy emulator case by pblagay](/t/9237554.jpg)
Atari ST HxC USB floppy emulator case by pblagay
... you to cut your own cable hole. the regular bottom part is for a square type cable grommit that came with the cable i was using.
thingiverse
free
![UltraSatan mounting bracket for Gotek floppy emulator](/t/4672478.jpg)
UltraSatan mounting bracket for Gotek floppy emulator
...e for exxos' atari stf remake board, as the standard atari st boards lack the internal header required for ultrasatan hookup.
thingiverse
free
![Spacer Gotek for Atari ST](/t/4883943.jpg)
Spacer Gotek for Atari ST
...s four m3 nuts for the original m3 screws. attach the gotek with small plastic screws to the spacer.
should also fit the mega st.
thingiverse
free
![Gotek Enclosure - Amiga G1010 by spyridonk](/t/8294078.jpg)
Gotek Enclosure - Amiga G1010 by spyridonk
...ternal-amiga-drive-adapter-cable-for-gotek-hxc-ff-usb-emulator-a500-boot-hack/272363110859?hash=item3f6a1b41cb:g:6z4aaoswydzac39n
thingiverse
free
![atari ST - GOTEK case mod by BRAINCELL](/t/8622651.jpg)
atari ST - GOTEK case mod by BRAINCELL
...ed the epoxy carefully to the back of the bezel on the vertical faces only as the top flange is there to cover any imperfections.
thingiverse
free
![Amiga 1200 Gotek Control Center case by FerryA1](/t/8375901.jpg)
Amiga 1200 Gotek Control Center case by FerryA1
...from https://www.thingiverse.com/thing:193647
the oled screen frame part was taken from https://www.thingiverse.com/thing:3387674
thingiverse
free
![Tandy 1000 External Drive Case by djos_1475](/t/8242940.jpg)
Tandy 1000 External Drive Case by djos_1475
...nal-floppy-drive-cable-kit/
drive adapters:https://www.tindie.com/products/cyberneticsys/tandy-1000-exhx-external-drive-adapters/
thingiverse
free
![Gotek External Case by Noz1380](/t/8344803.jpg)
Gotek External Case by Noz1380
...ngs in there, i drilled a hole, and added m3 inserts.
the round disks are to help printing and lifting with abs. easily trimmed.
Planc
3d_export
$43
![Falcon GAR1 missile 3D Model](/t/231210.jpg)
Falcon GAR1 missile 3D Model
...model 3dexport usa united states air force fighter jet planc aim-4 gar-1 falcon missile interceptor rocket air-to-air radar guided...
thingiverse
free
![Realacc X210 Pod - Swiss Cheese Edition :) by PlanC](/t/8713937.jpg)
Realacc X210 Pod - Swiss Cheese Edition :) by PlanC
...ld take more holes. back mounting holes widened so it can be mounted with cable ties. front can be either cable tied or screwed.
thingiverse
free
![Anet A8 Hotend Cables Support by PlanC](/t/8778415.jpg)
Anet A8 Hotend Cables Support by PlanC
... up for best results. i couldn't figure out how to save it that way in cura, so needs to be rotated.
sketchup files attached.
thingiverse
free
![Collection of Mods for RepRap Atom X by PlanC](/t/8658304.jpg)
Collection of Mods for RepRap Atom X by PlanC
...files if you want to alter them.
i think the biggest improvements to the atom x came from adding the heated bed and the bltouch.
thingiverse
free
![Fully parametric Multi point RAM Mount inspire by Air_wolf](/t/8896501.jpg)
Fully parametric Multi point RAM Mount inspire by Air_wolf
...sphere (projected value) angle_plan = 25; //angle between horizontal planc and sphere ratio_diam_lien = 0.5; //ration between sphere and...
grabcad
free
![MiG 29](/t/2931705.jpg)
MiG 29
...mig 29 grabcad mikoyan gurevich 29 fighter planc ...
3dwarehouse
free
![UAV/Stealth Bomber Concept](/t/5875604.jpg)
UAV/Stealth Bomber Concept
...used for my up and coming models #concept #jet #planc ...
3dwarehouse
free
![Cuisine](/t/10185841.jpg)
Cuisine
...cuisine 3dwarehouse voici une cuisine contemporaine rouge avec planc de travail en marbre, frigo américain, gaziniere electrique ultra...
3dwarehouse
free
![Bonhomme Lego surfer orange et rose V2](/t/5306032.jpg)
Bonhomme Lego surfer orange et rose V2
...peau rose et un t-shirt de surf et de planc à voile réalisé avec google sketchup avec des mains!!!!...
Gotek
thingiverse
free
![Gotek casing Amiga style](/t/4774803.jpg)
Gotek casing Amiga style
...gotek casing amiga style
thingiverse
this is a casing for the gotek floppy emulator in an amiga design.
thingiverse
free
![Gotek display case by blekihun](/t/9692178.jpg)
Gotek display case by blekihun
...ek display case by blekihun
thingiverse
a small case for small components. probably the first gotek trackball and display case?
thingiverse
free
![Gotek Screenholder by BlackmaxDK](/t/9691381.jpg)
Gotek Screenholder by BlackmaxDK
... do other stupid things
remeber to remove the taps on the lid of youre gotek, the tab will not fit when the holder is inserted...
thingiverse
free
![Generic Gotek USB bracket by _CrazyBob_](/t/8584956.jpg)
Generic Gotek USB bracket by _CrazyBob_
...elation to the floppy drive opening.
see my thingiverse profile for other gotek bracket designs.
note: this is just an experiment
thingiverse
free
![Gotek Drive Top Replacement by Pledg](/t/10233038.jpg)
Gotek Drive Top Replacement by Pledg
...on the bottom of the gotek and print the replacement top case part.
just snaps on or can be screwed in place if required.
simple.
thingiverse
free
![Gotek Floppy Drive Emulator by Middleman](/t/8790311.jpg)
Gotek Floppy Drive Emulator by Middleman
...by middleman
thingiverse
this is a model of the gotek floppy disk emulator i designed which can be used for sizing, display etc.
thingiverse
free
![Spacer Gotek for Atari ST](/t/4883943.jpg)
Spacer Gotek for Atari ST
...s four m3 nuts for the original m3 screws. attach the gotek with small plastic screws to the spacer.
should also fit the mega st.
thingiverse
free
![AKAI X7000 QuickDisk gotek adapter by _aTc](/t/8171581.jpg)
AKAI X7000 QuickDisk gotek adapter by _aTc
...000 quickdisk gotek adapter by _atc
thingiverse
adapter to mount gotek board as quickdisk replacement in an akai x7000 sampler.
thingiverse
free
![Gotek External Case by Noz1380](/t/8344803.jpg)
Gotek External Case by Noz1380
...ngs in there, i drilled a hole, and added m3 inserts.
the round disks are to help printing and lifting with abs. easily trimmed.
thingiverse
free
![LeCroy Gotek Floppy bracket by lagnajeet](/t/9223918.jpg)
LeCroy Gotek Floppy bracket by lagnajeet
...
3d printer bracket that can accommodate the gotek circuit board. it is same size as the existing slim citizen floppy disk drive.
Emulator
3d_ocean
$20
![E-mu Emulator II](/t/575008.jpg)
E-mu Emulator II
...ormat very highly detailed 3d model. include default c4d materials +textures (included in ‘tex’ folder) in .zip archive bonus ...
3d_export
$10
![toyota corona exiv](/t/11488810.jpg)
toyota corona exiv
...ry hardtop version of the corona and was introduced to emulate the twin carina ed. !!!!!!!!!(first work, without salon)!!!!!!!!!!
3d_export
$5
![tablet pen](/t/11434194.jpg)
tablet pen
...s the tip touches the surface and pressure is applied. non-display tablets display the handwriting on a separate computer screen.
3ddd
$1
![Artifort Bras sofas](/t/956477.jpg)
Artifort Bras sofas
...ailed and prepared for additional turbosmooth if needed. shaders are prepared to easy emulate multiple variants of color schemes.
3ddd
free
![Pastoe FM 60 with leather seat](/t/795664.jpg)
Pastoe FM 60 with leather seat
...e disstressed look.
be aware: shaders are set as blend with layers; these materials may rebder slower than simple vray materials.
3ddd
$1
![Artifort Bras sofa wooden frame](/t/956476.jpg)
Artifort Bras sofa wooden frame
...rbosmooth if needed. shaders are prepared to easy emulate multiple variants of color schemes. vraydispl mod is used in the model.
3ddd
$1
![Alvar Aalto CHAIR42](/t/846528.jpg)
Alvar Aalto CHAIR42
...ps, dirt etc.
be aware: some shaders are set as blend with layers; these materials may render5 slower than simple vray materials.
3ddd
$1
![Vintage rare lounge chair](/t/607150.jpg)
Vintage rare lounge chair
...the model is made to emulate a vintage, worn out look. high resolution bitmaps attached. the seat part of the model is unwrapped.
3ddd
$1
![Honda Slammer Bagger motorcycle](/t/380348.jpg)
Honda Slammer Bagger motorcycle
...f needed.
the motorcycle in the scene is rotated to emulate it's being parked. to straigten up the model rotate it 5 degrees.
3d_export
$60
![pilatus pc-21](/t/11416019.jpg)
pilatus pc-21
...h, the pc-21 possessed "superior aerodynamic performance when compared with any other turboprop trainer on the market".
Atari
3ddd
$1
![Atari 2600](/t/702173.jpg)
Atari 2600
...2600
3ddd
atari , консоль , картридж
atari 2600
3ddd
free
![Atari Джойстик](/t/718835.jpg)
Atari Джойстик
...atari джойстик
3ddd
atari , джойстик
ретро atari джойстик
3ddd
$1
![Atari 2600](/t/599138.jpg)
Atari 2600
...tari , ретро , консоль
ретро консоли atari 2600
turbosquid
$1
![ATARI](/t/13303855.jpg)
ATARI
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
![ATARI 1996](/t/13238683.jpg)
ATARI 1996
...bosquid
royalty free 3d model atari 1996 for download as max on turbosquid: 3d models for games, architecture, videos. (1194290)
turbosquid
$40
![Atari Joystick](/t/13454311.jpg)
Atari Joystick
...ree 3d model atari joystick for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1301592)
turbosquid
$25
![Atari controller](/t/13313367.jpg)
Atari controller
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
![atari gamepad](/t/13416744.jpg)
atari gamepad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![atari controller](/t/13248391.jpg)
atari controller
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Atari Controller](/t/13308868.jpg)
Atari Controller
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Floppy
turbosquid
$2
![Floppy](/t/13298812.jpg)
Floppy
...
turbosquid
royalty free 3d model floppy for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298033)
turbosquid
free
![Floppy](/t/13288444.jpg)
Floppy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
![Realistic Floppy Disc](/t/40859.jpg)
Realistic Floppy Disc
...op storage usb
this is a model of a floppy disc. floppy discs were used as computer storage devices before the invention of usbs.
turbosquid
$29
![Floppy Bird](/t/13280571.jpg)
Floppy Bird
...quid
royalty free 3d model floppy bird for download as blend on turbosquid: 3d models for games, architecture, videos. (1314253)
turbosquid
$6
![table floppy](/t/13267335.jpg)
table floppy
...squid
royalty free 3d model table floppy for download as max on turbosquid: 3d models for games, architecture, videos. (1424914)
3d_export
$5
![Floppy disk 3D Model](/t/34009.jpg)
Floppy disk 3D Model
...floppy disk 3d model
3dexport
floppy disk
floppy disk 3d model coolzero 36950 3dexport
turbosquid
$10
![floppy disk](/t/13234499.jpg)
floppy disk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Floppy disk](/t/13305244.jpg)
Floppy disk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Floppy Cover.max](/t/13252799.jpg)
Floppy Cover.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
![floppy disk](/t/13330778.jpg)
floppy disk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Carriage
archibase_planet
free
![Carriage](/t/946628.jpg)
Carriage
...arriage
archibase planet
perambulator baby carriage pram
carriage n250908 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
![carriage](/t/11888749.jpg)
carriage
...carriage
3dexport
old fashion carriage model, more files here:
turbosquid
$140
![Carriage](/t/13468425.jpg)
Carriage
...urbosquid
royalty free 3d model carriage for download as max on turbosquid: 3d models for games, architecture, videos. (1482052)
turbosquid
$25
![Carriage](/t/13355797.jpg)
Carriage
...urbosquid
royalty free 3d model carriage for download as max on turbosquid: 3d models for games, architecture, videos. (1285944)
3d_export
free
![carriage](/t/11890284.jpg)
carriage
...carriage
3dexport
game cart
3d_ocean
$15
![Barrel Carriage](/t/586074.jpg)
Barrel Carriage
...ieval oak old transport wheels wine wood
this model contains a barrel and a carriage. it is a medieval type of wood oak carriage.
turbosquid
$40
![Carriage](/t/13421099.jpg)
Carriage
...ty free 3d model carriage for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290094)
turbosquid
free
![Carriage](/t/13427049.jpg)
Carriage
...yalty free 3d model carriage for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1239157)
3d_export
$5
![Medieval carriage](/t/11371252.jpg)
Medieval carriage
...medieval carriage
3dexport
medieval carriage in fairy style
turbosquid
$58
![Carriage](/t/13427047.jpg)
Carriage
...d model carriage with scene for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1276262)
St
3ddd
$1
![ST Luce](/t/971462.jpg)
ST Luce
...st luce
3ddd
st luce
люстра потолочная светодиодная st luce sl869.502.04
люстра потолочная светодиодная st luce sl869.502.06
turbosquid
free
![AT-ST](/t/13281180.jpg)
AT-ST
...at-st
turbosquid
free 3d model at-st for download as blend on turbosquid: 3d models for games, architecture, videos. (1286732)
3ddd
$1
![ST TROPEZ chair](/t/864385.jpg)
ST TROPEZ chair
...st tropez chair
3ddd
st tropez
st tropez chair
3ddd
$1
![ST LUCE SL531.613.15](/t/836616.jpg)
ST LUCE SL531.613.15
...st luce sl531.613.15
3ddd
st luce
st luce sl531.613.15
3ddd
$1
![ST Luce SL217.503.03](/t/971473.jpg)
ST Luce SL217.503.03
...st luce sl217.503.03
3ddd
st luce
люстра подвесная st luce, sl217.503.03
3ddd
$1
![st luce](/t/971463.jpg)
st luce
...st luce
3ddd
st luce
http://www.stluce.ru/catalog/3645/23861/
3ddd
$1
![ST Luce SL878](/t/847863.jpg)
ST Luce SL878
...st luce sl878
3ddd
st luce
потолочная люстра st luce серия sl878
3ddd
$1
![St Luce](/t/971469.jpg)
St Luce
...st luce
3ddd
st luce , laubello
http://www.stluce.ru/catalog/3645/23945/
3ddd
$1
![St Luce](/t/971470.jpg)
St Luce
...st luce
3ddd
st luce , laubello
http://www.stluce.ru/catalog/3645/23969/
3ddd
$1
![St Luce](/t/836617.jpg)
St Luce
...st luce
3ddd
st luce , voltri
http://www.stluce.ru/catalog/3645/23874/