Gotek Floppy Case for OLED and Rotary Encoder by NEMike

Last crawled date: 3 years, 2 months ago

NOW with customizations, with or without Rotary Encoder, with or without the second led, with or without a third button hole and even add a bevel for the display window.
Here is my remodel of the Gotek floppy emulator case that accommodates the OLED display mod. Optionally you can choose with or without the rotary encode knob mod, a second led hole, or even a third button where the rotary encoder might go. You can also set a bevel in degrees for the OLED display window.
I didn't like the idea of using a Dremel etc to cut open the existing window on the gotek to accommodate an OLED display mod and using hot glue to hold it in. I used calipers and reproduced the Gotek case in OpenSCAD and then modified it to allow the OLED display to slot in just behind the opening, also provided a hole for the rotary encoder knob. I've included the OpenSCAD files for this project.