GOPRO FORK MOUNTING SPACER by dbcoop

Last crawled date: 4 years, 6 months ago

This is a block I made to mount a go-pro (or knock off) clip to the front forks of my FZ-09. It should work on lots of bikes with 48mm front fork tubes, if you need a different size simply message me. It has a hole for a 1/4-20 x 3/8" pan head screw to hold the clips in place before you use the webbing to secure it to the fork. I printed it out of TPU so it would slightly compress and the rubber like surface could grip the aluminum of the fork tube. This was printed on Goliath (the printer I will be uploading desings for this week but can be printed on pretty much anything. If you print in abs or PLA use some self adhesive rubber sheet or the corner of the rug no slip mat from your front hallway (make sure not to get caught by your significant other with scissors near the rug, this almost universally ends badly for the guy with the scissors.