GoPro Clone Action Camera to Binocular 3d model
Warning. This content is not moderated and could be offensive.
smoke
3dmdb logo
Thingiverse
GoPro Clone Action Camera to Binocular

GoPro Clone Action Camera to Binocular

by Thingiverse
Last crawled date: 4 years, 4 months ago
An adapter to couple a GoPro clone (4K Ultra HD Action etc) to a Haco 7x50 binocular. Openscad source provided (bit rough round the edges but it works).
This is Mark III - The final idea was to get the camera lens close to the eyepiece lens.
You may need to adjust the camera hole diameter for a tight fit... the o-ring helps provide a tight fit on the binocular eyepiece. You may also need to adjust the taper to suit your eyepiece (camera_ring_thickness 1 & 2). Elastic bands might do in lieu of o-ring if you don't mind ugly.
Printed ok with PLA & ABS - 30% infill, support.
By the way, Zalophus's tripod adapter worked well with my binoculars and seemed the simplest design available here at the time.
[Binocular Tripod Adapter]( https://www.thingiverse.com/thing:1008948)

Tags