Thingiverse
GoBo - (Nitrile) Glove Box (Case) by posixp
by Thingiverse
Last crawled date: 3 years, 4 months ago
Nitrile Glove Box for german "Element System" Peg Board System
You will need some aluminum for the frame (25x2mm) - and bend it to give the bottom stability. Please see the pictures.
Additionally, 4x 6mm holes required.
Fits snug to the peg board.
Isn't super rigged, however a fairly light (less material), quick print and individually adjustable (mounting higher/lower).
The glove box is held in place by gravity and thus moves slightly when used.
With a slight squeeze in the back, fits boxes up to 90x126mm on the short end. Height... "open": The blue demo box is 240mm long/high.
You'll need 4x "knopf" - that's the/a little plug that snaps into place.
Enjoy.
You will need some aluminum for the frame (25x2mm) - and bend it to give the bottom stability. Please see the pictures.
Additionally, 4x 6mm holes required.
Fits snug to the peg board.
Isn't super rigged, however a fairly light (less material), quick print and individually adjustable (mounting higher/lower).
The glove box is held in place by gravity and thus moves slightly when used.
With a slight squeeze in the back, fits boxes up to 90x126mm on the short end. Height... "open": The blue demo box is 240mm long/high.
You'll need 4x "knopf" - that's the/a little plug that snaps into place.
Enjoy.
Similar models
thingiverse
free
Nitrile Glove Box Wall Hanger by ObsessivelyGeek
...simple wall hanger for a box of nitrile gloves. no supports needed. print and mount with nails.
https://www.buymeacoffee.com/og3d
grabcad
free
Nitrile Glove box & holder
...nitrile glove box & holder
grabcad
wall mounted nitrile glove box & box holder.
thingiverse
free
Nitrile Gloves Box Pegboard Holder by massond
...ve boxes. there is a hole at the bottom to allow you to screw the bottom to the pegboard, if you have issues with it pulling up.
thingiverse
free
Plyer holder for german "Element System" Peg Board System by posixp
...yer holder for german "element system" peg board system.
fairly tight fit on peg board.
does what it is supposed to do.
thingiverse
free
Amazon Dynarex Bleusennitrile Blue Nitrile glove box holder
...rex bleusennitrile blue nitrile glove box holder
remix modifies so you can use 2-sided 1 inch tape along the back and not screws.
cg_trader
$8
latex gloves wallmount
...latex gloves wallmount
cg trader
wallmount with 3 boxes of latex nitrile gloves
thingiverse
free
Peg replacement for shelf by patinetilla
...board to be bigger. these pegs rise the board enough to fit the box underneath. the last picture corresponds to the original one.
thingiverse
free
Glove dispenser by RickysChocolateBox
... a hole in the bottom to push the empty box back out the top! you'll need to rotate it in your slicer so the top is facing up
thingiverse
free
Sea Doo Spark glove box extension by diver_dingo
...s that this will fit with the safety container in place, but with the sloped base this may fit.
please post a pic if you make one
thingiverse
free
Socket Holder for Peg Board by Buddy99
.../4" thick peg board (not tested)
188_25_thick-board fits with 3/16" diamter pegs on 1/4" thick boards (not tested)
Posixp
thingiverse
free
Gardena aquaBloom Rohr Schelle 6mm by posixp
...gardena aquabloom rohr schelle 6mm by posixp
thingiverse
simple tube clip to be screwed to surface.
thingiverse
free
Shelly 2.5 Case - One Channel by posixp
...s says on the box.
shelly 2.5 is symbolized by the transparent blue object.
requires 4 (+1) m3 bolts and m3 "sink ins".
thingiverse
free
Wacom Intuos Pen Holder - Remix by posixp
... "stability"
widened the cut out on the underside to accomodate the lid better (you may want to put a support in there)
thingiverse
free
Plyer holder for german "Element System" Peg Board System by posixp
...yer holder for german "element system" peg board system.
fairly tight fit on peg board.
does what it is supposed to do.
thingiverse
free
AJCDC - Another Jabra Charging Desk Clamp by posixp
...hick and jabra hsc018w headset.
i use thin (1mm) foam rubber to clamp to my desk (23mm).
works best with orginal (red) usb cable.
thingiverse
free
JARH - Just Another Remote Holder by posixp
...asa
the stl file is the basic holster - per tech. drawing.
the real world pictures are the premium model, which i may be selling.
thingiverse
free
Tool Holder for Contec Rock Steady Bike Work Stand by posixp
...
issue a m600 at layer height 8, insert magnets, continue
bolt tool holder to work stand with 2x m8x? bolts and nuts
caveats
none
thingiverse
free
YASPHH - Yet Another SUP Pump Hose Holder by posixp
...e like this.
requires your
pump hose be tapered at both ends to x millimeters;
pump body to have a circumvence of x millimeters.
thingiverse
free
DT Swiss 240s Cap & Axle Holder by posixp
...ttps://www.dtswiss.com/en/support/manuals
don't forget the starnut and special grease, if you are opening the ratchet system.
thingiverse
free
JASDC - Desk Clamp for Plantronics Blackwire 300 DA by posixp
...button
no bolts/glue required
enjoy!
and remember: give a comment, a like, whatever - we are in this together!
makekindnessnormal
Nitrile
3d_export
$20
seal tc framework oil seal 126 specifications in total
...the framework oil seal is made of high quality nitrile rubber and steel plate, with stable quality and long...
thingiverse
free
Nitrile Glove Dispenser by seanosteen
...nitrile glove dispenser by seanosteen
thingiverse
a handy glove dispenser for the workshop.
thingiverse
free
Nitrile Glove Box Wall Hanger by ObsessivelyGeek
...simple wall hanger for a box of nitrile gloves. no supports needed. print and mount with nails.
https://www.buymeacoffee.com/og3d
thingiverse
free
Nitrile Gloves Box Pegboard Holder by massond
...ve boxes. there is a hole at the bottom to allow you to screw the bottom to the pegboard, if you have issues with it pulling up.
thingiverse
free
Amazon Dynarex Bleusennitrile Blue Nitrile glove box holder
...rex bleusennitrile blue nitrile glove box holder
remix modifies so you can use 2-sided 1 inch tape along the back and not screws.
thingiverse
free
Vulcan Nitrile Glove Box Holder XL/150
...ideas in any case. mounts with #6 screw. it is fairly flimsy which helps with mounting, but i wouldn't get too rough with it.
thingiverse
free
Harbor Freight Nitrile Glove Dispenser by Halloween24x7
...ted.
while my pics display "daboo" on the front, which is my nickname, i've removed it from the uploaded file here.
thingiverse
free
Kirkland Nitrile Glove Holder by LadySapphy
...9;s on the box, but it still works as the hole in the print was sized to be a little large.
i mounted it using velcro strips.
thingiverse
free
COVID-19 Large Mask with exhaust valve by Dgr8one85
...exhaust one way vent. cut a square piece of nitrile glove and super glue one side near the top....
Gobo
3d_export
$60
Curtain window 3D Model
...window 3d model 3dexport curtain window windows drapes theater gobo stage red velvet modern english glass curtain window 3d...
thingiverse
free
Gobo Holder B to E by MAfelt
...gobo holder b to e by mafelt
thingiverse
gobo holder for gobo size b to e. only for led!
thingiverse
free
Body for a gobo projector by marates
...body for a gobo projector by marates
thingiverse
this is a easy-assembling body for a cheap gobo-projector.
thingiverse
free
gem loving gobo - t-model
...gem loving gobo - t-model
thingiverse
gobo
thingiverse
free
35mm GOBO - Window by JBIZALL
... and is a physical template slotted inside, or placed in front of, a lighting source, used to control the shape of emitted light.
thingiverse
free
35mm GOBO - Swirl by JBIZALL
... and is a physical template slotted inside, or placed in front of, a lighting source, used to control the shape of emitted light.
thingiverse
free
Scratch Gobo by MrsPollard
...i'll be sporting mine. you can also print scratch cat
i've added an stl without the earring loop, too.
about 25 mm high
thingiverse
free
blood bowl - spectators - camera gobo
...blood bowl - spectators - camera gobo
thingiverse
goblin camera man
thingiverse
free
Rosco Gobo E Light Blaster™ Adapter by SpiffyGear
...osco e gobo:
http://www.bhphotovideo.com/c/search?ntt=rosco+e+gobo&n=0&initialsearch=yes&sts=ma&top+nav-search=
thingiverse
free
35mm GOBO - Vertical Lines by JBIZALL
... and is a physical template slotted inside, or placed in front of, a lighting source, used to control the shape of emitted light.
Glove
archibase_planet
free
Gloves
...gloves
archibase planet
clothing gloves clothes
gloves n161109 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$25
surgical gloves doctor gloves rubber gloves sanitary gloves medical gloves
...nd some coronavirus models as well..and i do have some other pretty cool stuff as well. check it and rate this product..thank you
3d_ocean
$15
Boxing Glove
...boxing glove
3docean
boxing glove sport
this is 3d model boxing glove. v-ray materials.
turbosquid
$1
Glove
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Glove
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$6
Glove
... silicone cleaning brushes. these were modelled and prepared for photo-realistic renderings, close-ups, cg visualization. the ...
3d_ocean
$9
Boxing Glove
...g glove
3docean
3d model boxing boxing glove design equipment indoor leather sports v-ray
boxing glove 3d model. v-ray materials.
3d_export
$5
glove with blade
...glove with blade
3dexport
cyclse render, clawed glove with<br>retractable blade.
design_connected
$16
Glove Chair
...glove chair
designconnected
molteni & c glove chair chairs computer generated 3d model. designed by patricia urquiola.
archive3d
free
Gloves 3D Model
...hive3d
gloves clothing clothes
gloves 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.