Thingiverse
Go Pro fig rig, steady. by Thumber
by Thingiverse
Last crawled date: 4 years, 5 months ago
Go Pro Hero 3 fig rig. Handy for fast panning shots, or as a underwater camera holder.
Uses 4x M8x50 cap head bolts and nylon nuts.
I used a heat gun to settle any tolerances when assembling.
let me know if you like it. thanks!
I want to see your MAKES!
bottomslotselfstanding.STL included as a alternative bottom bar for those who want it to stand upright on a flat surface.
for those wanting to make a new slot to hold a different item such as a phone... in the slot.
the depth is 6mm, the width is 40mm at the bottom 30mm at the top. angle is 50.45 deg. reduce all by a mm to have a fighting chance.
Remember to wind in the nuts in and out of the nyloc nut first and use some lubricant on the the bolt.
Uses 4x M8x50 cap head bolts and nylon nuts.
I used a heat gun to settle any tolerances when assembling.
let me know if you like it. thanks!
I want to see your MAKES!
bottomslotselfstanding.STL included as a alternative bottom bar for those who want it to stand upright on a flat surface.
for those wanting to make a new slot to hold a different item such as a phone... in the slot.
the depth is 6mm, the width is 40mm at the bottom 30mm at the top. angle is 50.45 deg. reduce all by a mm to have a fighting chance.
Remember to wind in the nuts in and out of the nyloc nut first and use some lubricant on the the bolt.