Thingiverse
GNS 530 Stand by Mixdiver
by Thingiverse
Last crawled date: 4 years, 4 months ago
The model was designed in DesignSparks and needed to be expanded in Cura by 2540% for correct print size. DesignSpark file included in post.
GPS Mount was designed to be mounted to a Logitech Flight Yoke System with two existing screws in yoke's case.
The print took over 12hrs to print. Needed to use a Brim due to the corners. where front panel meets base, kept lifting. Even with the brim, corners still lifted due to shrinkage I guess but it finished the print.
Enjoy and let me know your experience with the print and the use of the stand in general.
GPS Mount was designed to be mounted to a Logitech Flight Yoke System with two existing screws in yoke's case.
The print took over 12hrs to print. Needed to use a Brim due to the corners. where front panel meets base, kept lifting. Even with the brim, corners still lifted due to shrinkage I guess but it finished the print.
Enjoy and let me know your experience with the print and the use of the stand in general.