Thingiverse
GMMK PRO PLATE Rev 2 by jog1183
by Thingiverse
Last crawled date: 4 years, 1 month ago
Used Mixl GMMK Pro Switch Plate design
Adjusted the rotary knob slot, to 1.3cm x 1.3cm
Added pin holes to top and bottom which is needed to close the top case
Adjusted distance of right column 0.71cm from the edge
Adjusted arrow key locations 1.13cm from the stab hole and 0.85cm from the right column
minor adjustment of the top row
stab hole increased from 6.5mm to 7.0mm (might need to increase more for durock v2s to fit)
Tested, design fits the gmmk pro. Durock V2 is compatible.
Sound test of FR4 platehttps://www.youtube.com/watch?v=HeufSTcTCgc&t=76s
Adjusted the rotary knob slot, to 1.3cm x 1.3cm
Added pin holes to top and bottom which is needed to close the top case
Adjusted distance of right column 0.71cm from the edge
Adjusted arrow key locations 1.13cm from the stab hole and 0.85cm from the right column
minor adjustment of the top row
stab hole increased from 6.5mm to 7.0mm (might need to increase more for durock v2s to fit)
Tested, design fits the gmmk pro. Durock V2 is compatible.
Sound test of FR4 platehttps://www.youtube.com/watch?v=HeufSTcTCgc&t=76s