Thingiverse
Glass Holder for prusai3 or similar 3D printers by Forc3D
by Thingiverse
Last crawled date: 4 years, 5 months ago
https://youtu.be/HuWh8x0EXNU
Bed glass holder for prusa i3 and similar 3d printers.
IMPORTANT
These use 19mm binder clips.
Each holder version 2 use two washers of aproximately 9mm OD, 3mm ID, 0.8mm width.
If after inserting the clips in its place they aren't exerting enough force to hold the glass you can use pliers to bend them a little.
I use a 214 mm x 214 mm x 3 mm glass that covers the hotbed entirely. This holders may not work for a glass smaller than the bed as the clips may not reach the glass.
Feel free to improve it or adapt it to your needs.
Bed glass holder for prusa i3 and similar 3d printers.
IMPORTANT
These use 19mm binder clips.
Each holder version 2 use two washers of aproximately 9mm OD, 3mm ID, 0.8mm width.
If after inserting the clips in its place they aren't exerting enough force to hold the glass you can use pliers to bend them a little.
I use a 214 mm x 214 mm x 3 mm glass that covers the hotbed entirely. This holders may not work for a glass smaller than the bed as the clips may not reach the glass.
Feel free to improve it or adapt it to your needs.