GHOSTBUSTERS - - - Slimer (Large scale) by dazzadazzadazzadazza

Last crawled date: 3 years ago

Upscaled Geoffro's most awesome slimer model.
This was cut down to max out the DS5 build plate potential and nearly 1:2 scale. Of course you will need to rescale all parts to suit your own needs.
If you find any bugs just let me know. It may be a while before i attempt this build myself.
Main model mesh has 90% polygon reduction (70 to 7Mb)
Print settings:
supports required. set to 90 degrees or less as required.
Layer height as of your choice.
3 to 4 layer wall thickness (1.6mm)
5% infill
Updates:
Head from 1.1 to 1.2. Made good boundary edges and installed higher resolution eyes.