Thingiverse
Ghostbusters leg hose connector by DotNetWorker
by Thingiverse
Last crawled date: 2 years, 11 months ago
Ghostbusters Leg Hose Connector
This is not supposed to be movie accurate, rather my interpretation of a practical leg hose connector. I didn't like seeing the stitching, so have hidden it under the body, giving it a neater look to the bystander, even if this is less "authentic" to those trying for movie copy.
Features
Safe friction fit hose, if hose is snagged it will break free from connector
Inner hose support, a internal support is provided for the exiting tube to help prevent it collapsing under its own weight and kinking, making it look better
Two part screw together design allows stiches to be hidden
Recessed thread channels allows thread to flow from one hole to another securely and avoid thread tearing when screwing on
3D printer tolerance applied to threads allow the model to be 3D printed and screw together tightly
Body length is on the shorter side of the designs I've seen, to stop it protruding too much, thus reducing leverage so it hangs better, pulling the material less.
Plenty of stitching holes placed near the edge of the circle, to make a neat interface with the material, less gap between the body and fabric
Unscrew for washing, reducing risk of damage to costume or connector during laundry as you don't have a big clunky piece of plastic to snag.
Printing
Requires supports everywhere when printing.
I used support roof and floor, 0.3mm z support distance, 10% support density and zig zag infill for easy separation in threads of support material.
25% infill with 3 outer layers. Use part cooling fan.
After printing carefully remove all the support from the threads and clean any rough spots. Should easily screw together.
Note
Due to the nature of the costume, there is always a risk of snagging, trip or falls. Please risk assess your costume and I cannot accept any responsibility for this part in use.
This is not supposed to be movie accurate, rather my interpretation of a practical leg hose connector. I didn't like seeing the stitching, so have hidden it under the body, giving it a neater look to the bystander, even if this is less "authentic" to those trying for movie copy.
Features
Safe friction fit hose, if hose is snagged it will break free from connector
Inner hose support, a internal support is provided for the exiting tube to help prevent it collapsing under its own weight and kinking, making it look better
Two part screw together design allows stiches to be hidden
Recessed thread channels allows thread to flow from one hole to another securely and avoid thread tearing when screwing on
3D printer tolerance applied to threads allow the model to be 3D printed and screw together tightly
Body length is on the shorter side of the designs I've seen, to stop it protruding too much, thus reducing leverage so it hangs better, pulling the material less.
Plenty of stitching holes placed near the edge of the circle, to make a neat interface with the material, less gap between the body and fabric
Unscrew for washing, reducing risk of damage to costume or connector during laundry as you don't have a big clunky piece of plastic to snag.
Printing
Requires supports everywhere when printing.
I used support roof and floor, 0.3mm z support distance, 10% support density and zig zag infill for easy separation in threads of support material.
25% infill with 3 outer layers. Use part cooling fan.
After printing carefully remove all the support from the threads and clean any rough spots. Should easily screw together.
Note
Due to the nature of the costume, there is always a risk of snagging, trip or falls. Please risk assess your costume and I cannot accept any responsibility for this part in use.
Similar models
cults
free
ghostbusters leg hose connector
...ghostbusters leg hose connector
cults
leg hose connector prop ghostbusters
ghostbusters leg hose connector
thingiverse
free
Ghostbusters 1 Leg Hose Connector by darrellcalkjr
...3872c205c927423f32a5cefa
it will accept a 1/2" od tube / hose
update 06/30/2019: smoothed out curves around outer perimeter.
thingiverse
free
Ghostbusters Leg Hose Adapter - with Threaded Insert by JAYRUNSAMOK
...s possible. also, you'll need supports as the outside leg hose adapter has a bit of a shelf on the inside that will need it.
thingiverse
free
Ghostbusters Leg Hose Connector by optimusgene
...ow the hose to clip and unclip to the belt easily..
here is the video i made for the hose connector: https://youtu.be/y_7-k2lkx3s
thingiverse
free
Converter from indoor faucet to outdoor attachment with hose connector by ketil
...short and the wall wasn't thick enough for a decent infill. i also recommend 100% rectilinear infill when printing this part.
thingiverse
free
ghostbusters leg hose connector by Dragonwim
...the base so that it could be more easily sewn onto a coverall. the hole is .54" in diameter and goes all the way through it.
thingiverse
free
PCB-BaseFrame high rigidity type parts for PRN3D by Mazu_Bunkai
...e connector.
i think that is also given role as a reinforcing parts of the body frame together, and you can be used for everyone.
thingiverse
free
Water Spout with Garden Hose Threads (GHT) by chickan
... this one has fillets leading up to the thumb screw, so no need for support material. this is the version shown in the picture.
thingiverse
free
JJ lung flush connectors by GregPye
...side.
o-rings needed are 34x2 for the lower end (same for the original). hose end ones are the standard ones for such connectors
thingiverse
free
Threaded Rocket w/ Interchangable parts by ericsoj
...e to print them with no infill but an extra shell (3).
i have not yet tested the flyability of this rocket!fly at your own risk
Dotnetworker
thingiverse
free
Sound detector board case by DotNetWorker
...sound detector board case by dotnetworker
thingiverse
case for audio detection board
allows access to trigger level
thingiverse
free
Eachine VTX03 Super Mini case by DotNetWorker
...eachine vtx03 super mini case by dotnetworker
thingiverse
simple holder to protect the eachine vtx03 super mini.
thingiverse
free
Handle for workbench (not workmate) by DotNetWorker
... my cheap workmate like workbench handle after jigsawing through the original one.
it needs a strong push to click it into place.
thingiverse
free
Coffee scoop measure by DotNetWorker
...d one up.
coffee scoop will fit diagonally on most printer beds.
it has a long handle for getting to the bottom of coffee bag.
thingiverse
free
MCP23017 Slip Case for port expander by DotNetWorker
...cp23017 16 bit port expander
m3 screw holes go all way through for mounting or optional model with lugs for screwing to surfaces.
thingiverse
free
Cycle pump cap replacement (Beto) by DotNetWorker
...e with beto hand pump.
thread is really fine so used a 0.2mm nozzle.
no supports required.
use more than 30% infill for strength.
thingiverse
free
Whiteboard Pen Holder for T slot whiteboards by DotNetWorker
...n in one of the photographs).
the pen holder slides into the t slot and can be positioned anywhere along the bottom of the board.
thingiverse
free
LED Matrix round eye holders by DotNetWorker
...learn.adafruit.com/animating-multiple-led-backpacks/ideas
when printed the matrix does push in but is a friction fit (its tight).
thingiverse
free
E23A 12V Battery holder by DotNetWorker
...tery held in holder, so provided a hole in back to allow the use of a pen or similar to push the battery out of the holder again.
thingiverse
free
REWIRE 102 Nano GPS Tracker battery protector by DotNetWorker
...inserting this 3d printed part, around the battery connector it takes the force of such an incident, thus protecting the battery.
Ghostbusters
3d_export
$5
ghostbusters
...ghostbusters
3dexport
ghostbusters.охотники за привидениями.
3d_export
$25
proton ghostbusters
...ly polarized protons that electrostatically traps the negatively charged energy of a ghost, allowing it to be held in the stream.
turbosquid
$5
GHOSTBUSTER GUN 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$35
Containment Unit Ghostbusters
...firehouse. it is a large, laser-confinement grid that holds and restrains all the vapors and entities that the ghostbusters trap.
3d_export
$25
Ghostbusters home
... city. its exterior has become famous as the base of the ghostbusters in the supernatural comedy film franchise of the same name.
3d_export
$25
proton pack ghostbusters
...ly polarized protons that electrostatically traps the negatively charged energy of a ghost, allowing it to be held in the stream.
3d_export
$99
Cadillac ECTO1 Ghostbusters 1959 3D Model
...ring 1959 movie famous ghost ecto-1 ghostbusters busters emergency
cadillac ecto1 ghostbusters 1959 3d model squir 86957 3dexport
3d_export
$25
ghost trap ghostbusters
...t when a captured ghost is put into the containment unit, the entity is pumped out of the trap cartridge so it can be used again.
3d_export
$5
Ecto ghostbusters
...al information about number of polygons or the vertices are mentioned in 3d model specifications package includes: -fbx -obj -stl
cg_studio
$99
Cadillac ECTO-1 Ghostbusters 19593d model
...fbx .lwo .max .obj - cadillac ecto-1 ghostbusters 1959 3d model, royalty free license available, instant download after purchase.
Hose
archibase_planet
free
Hose
...hose
archibase planet
fire-hose fire safety
fire hose cabinet - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
hose
...se
turbosquid
royalty free 3d model hose for download as fbx on turbosquid: 3d models for games, architecture, videos. (1479257)
3d_export
$5
Hose bracket
...hose bracket
3dexport
this file consists of hose bracket 3d model used for tensioning of geo trail mesh along with pdf drawing
archive3d
free
Hose 3D Model
...ire-hose fire safety
fire hose cabinet - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hose clamp
...hose clamp
3dexport
turbosquid
$30
Japanese Hose
...free 3d model japanese hose for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1633620)
turbosquid
$39
Spray Hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$28
Fire hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
vacuum hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$6
Fire Hoses
...ow polygonal models, easy to animate. - poly count: 1678 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 204...
Connector
turbosquid
$5
Connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Connector 3D Model
...connector 3d model
3dexport
connector штекер 3d
connector 3d model manch111 83121 3dexport
3d_export
$14
connector production equipment
...connector production equipment
3dexport
connector production equipment
3d_export
$10
connector xt60
...e designing, and will help save your precious time. the scale of the model is 1:1. the dimensions are for reference in the image.
turbosquid
free
Audio connectors
...del audio connectors for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1424706)
3d_export
$20
car connectors dj70
...quot; connector 9-pin "dj7091a-2.8-11/21" terminal (male) "dj611-2.8" terminal (female) "dj622-2.8"
turbosquid
$30
Cinch connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Jumper Connector
...umper connector for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1494917)
turbosquid
$15
RCA Connector
...l rca connector for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1376648)
Leg
3d_ocean
$10
Furniture Legs
...furniture legs
3docean
furniture furniture legs leg legs metal leg
furniture legs,legs,
archibase_planet
free
Leggings
...eggings
archibase planet
leggings gaiters gaiter clothes
leggings n140713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$4
Chicken legs
...chicken legs
3docean
3ds arman3dg chicken chicken legs games legs low max poly
chicken legs…
turbosquid
$1
legging
...ng
turbosquid
royalty free 3d model legging for download as on turbosquid: 3d models for games, architecture, videos. (1569799)
3d_export
$25
table leg
...table leg
3dexport
table leg with ram
turbosquid
$19
Leg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
lion leg
...lion leg
3dexport
3d lion leg for cabinet
3d_export
$5
table leg
...table leg
3dexport
table leg for wood milling machine
3ddd
$1
Leg Exercise
...leg exercise
3ddd
тренажер
leg exercise equipment fitness
3d_export
$5
two-legged hook
...two-legged hook
3dexport
two-legged hook