Thingiverse
Gents Saw Handle Upgrade by bobm123
by Thingiverse
Last crawled date: 4 years, 3 months ago
Handle Upgrade for a Gent's Saw style dovetail saw.
I got the idea from this guys youtube video:https://www.youtube.com/watch?v=uz_jni42FZ0
But thought it would be fun to try modeling it with Fusion360.
The basic pattern I followed can be found here:http://www.blackburntools.com/articles/saw-handle-templates/index.html
(I used the 9-inch open pattern)
Usually this kind handle of is made from one piece of wood and the saw blade itself is used to cut a slot in the middle. I chose to make a left and right side for easy, no supports printing. The thin (.4 mm) spacer goes between them to compensate for the blade thickness.
I got the idea from this guys youtube video:https://www.youtube.com/watch?v=uz_jni42FZ0
But thought it would be fun to try modeling it with Fusion360.
The basic pattern I followed can be found here:http://www.blackburntools.com/articles/saw-handle-templates/index.html
(I used the 9-inch open pattern)
Usually this kind handle of is made from one piece of wood and the saw blade itself is used to cut a slot in the middle. I chose to make a left and right side for easy, no supports printing. The thin (.4 mm) spacer goes between them to compensate for the blade thickness.